Quick Reference; Attaching The Stand - Sharp 26DV24U - LC - 26" LCD TV Operation Manual

QUICK REFERENCE
• Before attaching (or detaching) the stand, unplug the AC
cord from the AC input terminal.
• Before performing work spread cushioning over the base
area to lay the TV on. This will prevent it from being damaged.
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
1 Confirm the 8 screws supplied with the TV.
Short screws (X4) Long screws (X4)
(used in step 2) (used in step 3)
2 Remove the covering sheet of the stand.
Set the post for the stand unit onto the box.
Attach the base to the post.
_3_Attach the base to the 4 screws into the 4 holes on the
bottom of the base.
Hex key--_i
Screw --
_i_ Insert the stand into the openings on the bottom of
the TV.
Insert and tighten the 4 screws into the 4 holes on the
rear of the TV.
@__ _Hex key
T If _ '_Screw
Soft cushion
For protection, sheets
are covering the product.
Please remove these
sheets before use.
• To detach the stand, perform the step in reverse order.
_-7
50Q0131A E.indb 7 (_#.b _ 3/3/2008 1:43:22 PM