3. Remove the carbon deposits on the muffler
screen and spark arrester using a wire brush.
cC
When cleaning, use the wire brush lightly to avoid
damaging or scratching of the muffler screen and
711-075
spark arrester.
4. Check the muffler screen and spark arrester.
Replace them if damaged.
5. Install the spark arrester.
NOTE:
Align the spark arrester projection 1 with the hole 2
in the muffler pipe.
2
1
711-7XFd
6. Install the muffler screen and the muffler cap.
7. Install the rear cover and tighten the bolts.
711-7XFe
– 32 –