Table of Contents
Advertisement
number inputting box of account connecting dialog box and cancel the selected multiple choice
box of Use area number and dial rule . Then press Next and in account logging dialog box set
'
'
'
'
the user name and password inputting box as empty, without inputting any information. Then
press Next and PC will remind you of the empty user name and password. You should press
'
'
confirming and the dialog box of connecting name will be opened, where you can input your
connecting name or use the default one. Then press Next and dialog box will remind you to set
'
'
a mail account. You should select No and then press Next . Finally you press Complete and
'
'
'
'
'
'
the connection is successful.
7.After connection is established, you can double click the connection to dial next time directly,
no need to create a new connection again.
8.Double click the established connection and set the user name and password as empty. Press
'
Property and select modem used in connecting in dialog box. Select the modem of Standard
'
'
Modem over IR link which has been connected successfully and input
'
'
*98*1#
'
in the phone
number inputting box. After confirming and saving return to the dial dialog box. Press Dial to
'
'
dial. After successful dial you can log on Internet in PC and at the same time the received and
sent bytes' numbers will be displayed on the mobile phone.
Use of GPRS network: If you have enabled GPRS, please set the number of dial to Internet as
*98*1#
no need of user name and password .
The above parameters such as
'
*98*1#
'
are for reference.For correct number please contact
50
Advertisement
Table of Contents
