Edit A Bluetooth Partnership; Use Your Hp Ipaq As A Wireless Modem With Bluetooth; Bluetooth Device Profiles - HP 914c - iPAQ Business Messenger Smartphone Product Manual

To end a Bluetooth partnership:
1. Tap Start > Settings > Connections > Bluetooth.
2. Tap and hold the partnership you want to end.
3. Tap Delete.
To accept a Bluetooth partnership:
1. Make sure that your HP iPAQ is discoverable and placed within close range with the pairing
device.
● Tap Start > Settings > Connections > Bluetooth > Mode.
● Select the Make this device visible to other devices check box.
2. When prompted to accept a partnership with the device that is requesting the relationship, tap
Yes.
3. If a passkey is requested, enter an alphanumeric passkey between 1 and 16 characters in
Passkey box, and then tap Next. Enter the same passkey in the device requesting the
partnership. Using a passkey provides greater security.
4. Tap Done.
If you cannot discover another device, try the following:
●
Make sure Bluetooth is turned on.
●
Move closer to the device.
●
Make sure the device you are attempting to connect is on and is visible to other devices.

Edit a Bluetooth partnership

To rename a Bluetooth partnership:
1. Tap Start > Settings > Connections > Bluetooth.
2. Tap and hold the partnership you want to edit.
3. Tap Edit.
4. In the Display Name box, enter a new name for the partnership.
5. Tap Save.

Use your HP iPAQ as a wireless modem with Bluetooth

You can use your HP iPAQ as a wireless modem to connect your Bluetooth-enabled computer to
the Internet. For more information, see
on page 112

Bluetooth device profiles

The functions that Bluetooth supports are called services or profiles. You can communicate only with
Bluetooth devices that support at least one of the following profiles:
●
ActiveSync Over Bluetooth
●
Advanced Audio Distribution Profile (A2DP)
●
Generic Access Profile (GAP)
78 Chapter 14 Connections
To connect to a laptop using Bluetooth data connection