Tilt Up And Down (No. 4 & 5); Follow Mode - Lock To Gps Position And Heading (No. 6) - HP 914c - iPAQ Business Messenger Smartphone Navigation Manual

Tilt up and down (No. 4 & 5)
These semi-transparent buttons are only displayed if "Zoom & Tilt" is enabled in the
Quick menu (Page 57).
This function modifies the vertical viewing angle of the map in 3D mode. You can
change the angle in a wide range starting from a top down view (2D view is
seamlessly integrated) all the way to a flat view that lets you see far ahead.
The automatic Smart Zoom function will do the necessary tilting for you when
navigating (gives a flat view if the next turn is at a distance to let you see far ahead
and raises the angle when approaching a turn to give you a better view of the
upcoming manoeuvre). If you manually change the view angle, Smart Zoom will no
longer tilt the map by itself (automatic zooming and rotating remains active).
You need to press Enter (Page 12), or tap the Follow button (Page 42) to return the tilt
control to Smart Zoom. You can also set HP iPAQ Trip Guide to do this automatically
after a few seconds (Page 96).

Follow mode - lock to GPS position and heading (No. 6)

This semi-transparent icon is displayed if GPS position is available, and the map has
been moved or rotated. It also appears when you scale or tilt the map while Smart
Zoom is enabled.
Normally HP iPAQ Trip Guide positions the map to keep the GPS position visible
somewhere on the map (when North-up orientation is selected), or always at the
bottom centre of the map (when Track-up orientation is selected).
If you manually move the map, it will freeze the map in the new position. To return to
the GPS position, use this Follow button.
42