Haier CM200 User Manual page 6

5.When the system prompts you that the installation is finished, click Finish to
finish the installation of the CM200 Manager.
Uninstalling
Uninstalling the CM200 Manager through the Add / Remove in the Windows.
Accessing & Exiting
Accessing the CM200 Manager GUI
1. To start program, double-click the shortcut icon of the CM200 Manager on the
desktop;
2. If you are prompted to enter PIN code, enter the correct one and click OK;
You can try 3 times to enter your PIN code. If you failed to do that after 3 times,
your R-UIM card would be locked, if this happens, use the PUK code to unlock it.
You can try 10 times to enter your PUK code. If you failed to do that after 10 times,
your R-UIM card cannot be used, if this happens, contact your network operator.
If you failed to enter PIN or PUK code, you can click Cancel to skip over the
authentication of the PIN code. Then, the functions related to the R-UIM card are