Charging The Battery - Sharp 880SH User Manual

Charging the Battery

You must charge the battery for at least 150 minutes
before using your phone for the first time.
Using the Charger
1.
Open the cover of the external connector, and
connect the charger horizontally to the external
socket located at the bottom of the phone until it
clicks.
2.
Connect the charger to an AC outlet.
When the phone is charging, the battery status icon
( ) displays the current status. The Small Light
also lights up.
Standard charging time: Approx. 150 minutes
Note
• Charging time may vary depending on the state of the
battery and other conditions. (See "Battery" on
page 14.)
To Disconnect the Charger
When charging is complete, the battery indicator icon
displays the full charge status. The Small Light also
turns off when completed.
1.
Unplug the charger from the AC outlet.
2.
Push and hold the side buttons of the charger
then disconnect the charger from the external socket
of the phone .
3.
Close the cover.
Note
• Do not use any non-approved chargers as they may
damage your phone and invalidate any warranties,
see "Battery" on page 14 for details.
• Forcibly disconnecting the charger may cause
malfunction.
,
Getting Started 27