Panasonic CF-19FDGAXCM Operating Instructions Manual page 23

10 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-
puter.
11 Remove the CD/DVD drive.
12 Turn on the computer, and press
played.
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
13 Press .
F9
At the confi rmation message, select [Yes] and then press Enter .
The Setup Utility settings excluding the password(s) will return to the default values.
14 Select the [Exit] menu and then select [Save Current Values], then press
At the confi rmation message, select [Yes] and press Enter .
15 Turn the computer off by using the power switch.
If additional instructions are included with the computer, be sure to read them. It may be necessary to per-
form additional operations during the following procedure.
16 Perform the fi rst-time operation (
17 Start the Setup Utility and change the settings as necessary.
several times while [Panasonic] boot screen is dis-
F2
page 12).
.
Enter
23