Tuning In Strong Signals; Storing Broadcast Frequencies - Pioneer AVIC S1 - Automotive GPS Receiver Operation Manual

■Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for
good reception.
1 Press 5 or ∞ in the TUNER MENU to select "LOCAL", and press A.MENU (AUDIO)
button.
2 Press 2 2 2 2 or 3 3 3 3 to set the sensitivity.
There are four levels of sensitivity for FM and two levels for AM :
FM : OFF - 1 - 2 - 3 - 4
AM : OFF - 1 - 2
The 4 setting allows reception of only the strongest stations, while lower settings let you
receive progressively weaker stations.

■Storing broadcast frequencies

You can easily store up to six broadcast frequencies for later recall with the press 5 or ∞.
1 Press 5 or ∞ to select "P.CH MEMORY" from the TUNER MENU, and press A.MENU
(AUDIO) button.
2 Adjust frequency with 2 or 3.
If you continue pressing 2 or 3, a strong broadcast frequency is automatically searched
for, and search ends when it is found.
3 Select a preset channel number with 5 or ∞ and press A.MENU (AUDIO) button to
preset that frequency.
4 If you want to preset frequencies one after another, use 5 or ∞ to move to the next
preset channel you want to use to store a frequency, and perform the same opera-
tion.
When you have finished, press BAND/ESC button to return to the source display.
The selected radio station frequency has been stored in memory.
You can use 5 and ∞ to recall radio station frequencies assigned to P1-6 (P.CH MEM-
ORY).
119