General Safety Rules - Craftsman 11580 - C3 19.2 Volt Hammer Operator's Manual

112", 19,2 volt hammer drill variable speed
Table of Contents

Advertisement

A
WARNING:
Do not allow familiarity with tools to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
A
WARNING:
Always wear safety goggles or safety
glasses with side shields when operating tools.
Failure to do so could result in objects being thrown
into your eyes, resulting in possible serious injury.
A
WARNING:
Do not use any attachments or acces-
sories not recommended
by the manufacturer of
this tool. The use of attachments or accessories not
recommended
can result in serious personal injury.
APPLICATIONS
You may use this tool for the following purposes:
[] Drilling in wood
[] Drilling in ceramics, plastics, fiberglass, and laminates
[] Drilling in metals
[] Mixing paint
[] Hammer drilling in concrete, brick, or other masonry
This product will accept DieHarde_ 19.2 V lithium-ion bat-
tery packs and Craftsman 19.2 V nickel-cadmium
battery
packs.
For complete charging instructions,
refer to the Operator's
Manual for the battery packs and chargers listed in the
General Safety Rules.
TO INSTALL
BATTERY
PACK
See Figure 3.
m Lock switch trigger on the drill by placing the direction
of rotation selector in the center position.
m Place battery pack in the drill. Align raised rib on
battery pack with groove inside drill.
CAUTION:
When placing battery pack in the drill,
be sure raised rib on battery pack aligns with groove
inside drill and latches snap into place properly.
Improper assembly of battery pack can cause dam-
age to internal components.
[] Make sure the latches on each side of the battery pack
snap in place and battery pack is secured in drill before
beginning operation.
TO REMOVE
BATTERY
PACK
See Figure 3.
m Lock switch trigger on the drill by placing the direction
of rotation selector in the center position.
m Locate the latches on the side of the battery pack and
depress to release the battery pack from the drill.
m Remove battery pack from the drill.
LATCHES
DEPRESS LATCHES TO
RELEASE BATTERY PACK
Fig. 3
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

315.115800

Table of Contents