Table of Contents
Advertisement
Status of the UPS, measurements, and alarms are all indicated on the LCD screen.
Tower Unit
ON
ON-LINE ON-BATT BYPASS FAULT
FLAG
7.4
Normal Display
The UPS status is shown in the normal display mode. The UPS Meters display and the
Setting display may be accessed by pressing the Return button on Tower Unit and
FUNC button on the Rack Unit.
7.5
UPS Meters Display
Listed below are the parameters available for viewing from the UPS meters display.
Press this button to scroll through the parameters.
LCD Message
O/P VOLT= xxx.xV
O/P FREQ= xx.x Hz
I/P VOL T= xxx.xV
I/P FREQ= xx.x Hz
ENTER
ON/OFF
Figure 3 Control panels
Shows Output AC Voltage
Shows Output Frequency
Shows Input AC Voltage
Shows Input Frequency
Rack Unit
Description
19
Advertisement
Table of Contents
