Pre-Confirmation Items; Setting - Sony PCS-G50 System Integration Manual

1-10-2. Pre-confirmation items

Confirm the following before installation.
. 4CIF mode cannot be used for mixed connection of LAN and ISDN or LAN and SIP.
. 4CIF mode cannot be used for cascade connection.
m
. When DSB transmission is performed in the 4CIF mode, the following cases of screen image are
automatically switched to the CIF mode.
a) mosaic
b) full screens when a main terminal is a broadcaster.
It is returned to the state before transmission when DSB transmission stops.
. When dual video transmission is performed in the 4CIF mode, the following cases of screen image are
automatically switched to the CIF mode.
a) mosaic
b) full screens when a main terminal is a broadcaster.
It is returned to the state before transmission when dual video transmission stops.
. The output to the five monitors is not limited when five monitors are used on the main terminal side of
PCS-G70/G70P.
. A still picture is not limited in transmission.

1-10-3. Setting

Perform the 4CIF mode setting using the Communication Setup Menu.
Set the 4CIF mode of all terminals, which participate in a conference, to "ON" or "Auto".
n
No change can be made during conference.
m
. Turning on the Individual Settings allows you to perform transmission, reception and multipoint
settings individually.
. The setting of a 4CIF mode can be confirmed using the Communication Submenu during communica-
tion.
Description of 4CIF mode
Auto: Automatically set to the 4CIF mode when the bandwidth per point is more than 384 Kbps in
the split mode.
Automatically set to the 4CIF mode for the full screen camera image when a main
terminal is a broadcaster and the bandwidth is more than 1024 Kbps.
(Factory setting: Auto)
ON: Set to the 4CIF mode irrespective of the bit rate.
OFF: Not set to the 4CIF mode irrespective of the bit rate.
1-52
PCS-G70/G70P/G50/G50P