Installation; Connecting The Blu-Ray/Hd Media Player; Connecting The Player To Your Display - Asus O!PLAY BDS-500 Owner's Manual

9
4

Installation

Connecting the Blu-ray/HD Media Player

Tip: Do not plug the AC power cord into the power socket until you have made all the necessary
connections.
Note: The model used in the illustrations below is BDS-700. BDS-500 has only one HDMI port (A/V out).

Connecting the player to your display

HDMI connection (Direct to Display):
HDMI connection (Through AVR):
Note: If your AVR does not support HDMI version 1.4, the 3D-BD contents may not be displayed. To
remedy this problem, see "Separated HDMI audio and video connection (BDS-700 only)" on page 11.