Reference
Step 12
Ship or deliver the DMP to its deployment site, and then:
a.
b.
c.
Step 13
Stop. You have completed this procedure.
Related Topics
•
Assign a Static IP Address to a Wireless DMP 4400G
Procedure
Step 1
Log in to your wireless access point as an administrator.
Step 2
Use its administrative features to assign a static IP address to your DMP.
Step 3
Stop. You have completed this procedure.
Related Topics
•
Show the Assigned IP Address
Before You Begin
•
Procedure
Step 1
Click
The address is briefly visible on your DMP display.
Step 2
Stop. You have completed this procedure.
Reference
•
•
User Guide for Cisco Digital Media Player Device Manager 5.2.x
11-16
Connect it to its presentation system.
Connect it to its local network segment.
Connect it to its power source.
Assign a Static IP Address to a Wireless DMP 4400G, page 11-16
Prepare Your DMP to Use a Static IP Address Over Ethernet, page 11-14
If you have not yet obtained an IP address for your DMP, see the quick start guide for your DMP
model type to learn how to connect and set up your DMP.
to learn the IP address of your DMP.
Network Settings Reference, page 11-17
FAQs and Troubleshooting, page 11-18
Chapter 11
Configure Network Settings
OL-15764-03