Installing Battery; Installing The Battery - Haier PDVD770 User Manual

Install the battery into the remote control as illustrated below:
Attach the rechargeable battery pack onto the player's bottom as illustrated below:
BATTERY
PACK
NOTE:
This unit works either with the battery pack supplied or on AC power. Unplug the AC Power adapter from the DC input jack to
use the battery pack (after it is fully charged). Plugging in the AC Power adapter while the battery pack is attached initiates
battery charging. The charge LED indicator flashes red during charging, When the battery is fully charged the indicator steadies
on. Fully charging a run-out battery pack may take 4 hours or longer. A fully charged battery pack can endure approximately 2.5
hours of continuous DVD playback. This playing time may vary with the surrounding environment, the volume level of the
speaker and the battery condition. It is advised that you wait 10-20 minutes before recharging the battery pack if it has gone flat
during operation.
BOTTOM VIEW
4