Summary of Contents for JVC JY-VS200U - Professional Dv 1-ccd Camcorder
Page 1
RECORDING Advanced Features For Video And D.S.C. (cont.) Program AE With Special Effects Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully . Press the MENU wheel.
Page 2
SHUTTER 1/60–The shutter speed is fixed at 1/60th of a second. Black bands that usually appear when shooting a TV screen become narrower. 1/100–The shutter speed is fixed at 1/100th of a second. The flickering that occurs when shooting CLASSIC FILM * under a fluorescent light or mer cury-vapor lamp is Gives recorded scenes a strobe effect.
RECORDING Advanced Features For Video And D.S.C. (cont.) Exposure Control Iris Lock Use this function in the following situations: Manual exposure adjustment is recommended in the • When shooting a moving subject. following situations: • When the distance to the subject changes (so its •...
White Balance Adjustment Manual White Balance Operation A term that refers to the correctness of color Perform Manual White Balance when shooting under reproduction under various lighting. If the white various types of lighting. balance is correct, all other colors will be accurately Follow steps 1 through 4 of the white balance reproduced.
PLAYBACK Basic Playback For Video Power Zoom Lever (VOLUME) Load a tape ( pg. 12). Power Switch Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. To start playback, press 4/6. • To stop playback, press 5. •...
Page 6
PLAYBACK Advanced Features For Video Using Menus For Detailed Adjustment Power Switch The following procedure applies to all except Synchro Comp ( pg. 69, 70). Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Press the MENU wheel.
Page 7
PLAYBACK Advanced Features For Video (cont.) Playback Sound During video playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on pg.
Blank Search Power Switch Helps you find where you should start recording in the middle of a tape to avoid time code interruption pg. 23). Load a tape ( pg. 12) and set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
PLAYBACK Basic Playback For D.S.C. Normal Playback Stop Button (5) Images shot with the camcorder are automatically Rewind Button (2) numbered, then stored in numerical order in the memory card. You can view the stored images, one at a time, much Play Button (4/6) like flipping through a photo album.
INDEX Screen Picture quality The images you shot can be displayed together with their Directory and file names File size index information. Convenient for checking images shot beforehand, the INDEX Screen also shows the Picture Index number Selected image quality, directory and file names as well as which images are protected against accidental erasure.
Page 11
PLAYBACK Advanced Features For D.S.C. Protecting Images The Protect mode helps prevent the accidental erasure of Power Switch images. When a padlock mark is displayed next to the Picture Quality indication, that image cannot be deleted. Set the Power Switch to “ ”...
Deleting Images MEMORY PLAY Button Previously shot images can be deleted either one at a time or all at once. Perform steps 1 through 3 of “Protecting Images” on pg. 46. Rotate the MENU wheel to select “IMAGE DEL.” and press it.
Page 13
PLAYBACK Advanced Features For D.S.C. (cont.) Superimposing A Print Frame A selection of print frames are stored in the camcorder . A frame can be superimposed over a still image. Play back an image stored in the memory card. Press PRINT FRAME. The Print Frame Index Screen appears.
Initializing A Memory Card Power Switch You can initialize a memory card anytime. After initializing, all images and data stored in the memory card, including those which have been protected, are cleared. Set the Power Switch to “ ”, while pressing down the Lock Button located on the switch.
Page 15
PLAYBACK Advanced Features For D.S.C. (cont.) Print Frame Deletion Power Switch A print frame created on a PC can be transferred to a memory card using the provided software. Print frames that have been transferred to a memory card can be deleted when they are no longer needed.
Page 16
TO DELETE ALL PRINT FRAMES MEMORY PLAY Button Perform steps 1 through 5 on pag. 50. Rotate the MENU wheel to select “ALL” and press it. The Deletion Confirmation Screen appears. Rotate the MENU wheel to select “EXECUTE” and press it. All the print frames are deleted. MENU Wheel •To cancel deletion, rotate the MENU wheel to select “CANCEL”...
PLAYBACK Advanced Features For D.S.C. (cont.) Setting Print Information (DPOF Setting) Power Switch This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing, which records information about the still images you wish to print (such as the number of prints to make).
Page 18
TO PRINT BY SELECTING STILL IMAGES MEMORY PLAY Button AND NO. OF PRINTS Perform steps 1 through 5 on pg. 52. Rotate the MENU wheel to selsect “SELECT” and press it. Selection is complete. The DPOF Screen appears. MENU Wheel Rotate the MENU wheel to move the green frame to the image you wish to print and press it.
Page 19
CONNECTIONS Basic Connections These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. Connection to a TV or VCR equipped with an S-VIDEO A. Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input IN and A/V input connectors connectors Jack Box...
Page 20
NOTES: Make sure all units are turned off. It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg. 9). Connect the camcorder to a TV or VCR as To monitor the picture and sound from the shown in the illustration ( pg.
The still images can also be transferred to a PC with a DV connector-equipped capture board. When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.
Page 22
Also refer to the instruction manuals of the connected units. To PC When using a DV cable, be sure to use the optional JVC connector VC-VDV204U DV cable. Core filter Digital Printer...
Page 23
DUBBING Dubbing To Or From A VCR Power Switch [To use this camcorder as a player] Following the illustration, connect the camcorder and the VCR. Also refer to pg. 54 and 55. Set the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch, To AV turn on the VCR’s power, and insert the appropriate...
DUBBING (cont.) Dubbing Images Recorded On A Tape To A Power Switch Memory Card SNAPSHOT Images can be dubbed from a tape to a memory card. Button Load a memory card ( pg. 13) and cassette pg. 12). Set the Power Switch to “ ”...
USING THE REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. Installing The Batteries The remote control uses two “AAA (R03)”...
Page 27
USING THE REMOTE CONTROL UNIT (cont.) & Functions With the camcorder’s Power With the camcorder’s Power Switch set to Buttons Switch set to the camera “ ”. position (“ ” or ”) . Infrared beam transmitting window Transmits the beam signal. Zoom (T/W) Buttons Zoom in/out ( pg.
Slow-Motion Playback FEATURE: PURPOSE: To allow slow-speed search in either direction during video playback. OPERATION: 1) To change from normal to Slow-Motion Playback, press SLOW (9 or 0) more than approx. 2 seconds. After approx. 1 minute in Slow Rewind or approx. 2 minutes in Slow Forward, normal playback resumes.
USING THE REMOTE CONTROL UNIT (cont.) PLAYBACK EF FEC Playback Special Effects PLAYBACK EFFECT FEATURE: Select Menu PURPOSE: CLASS I C F I LM MONOTONE To allow you to add creative effects to the video SEP I A playback image. STROBE V I DEO ECHO OPERATION:...
(A) (B) NAME (A) (B) Editing. PHILIPS IMPORTANT Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with PANASONIC yours or may offer limited functions. HITACHI NOTES: If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST.