Controlling The Application Manually; Sending A Still Image File To An Ftp Server; Sending A Still Image Via E-Mail; Recording A Still Image On A Usb Flash Memory Or The Built-In Memory Of This Unit - Sony Ipela SNT-V704 User Manual

Controlling the
Application Manually
You can send an image or output a trigger to control the
alarm output, using the image control section on the
main viewer page.
For this function, user access right Level 3 or Level 4 is
required (see page 39).
Click Trigger on the menu section to display the
trigger control parts.
Image control section (trigger control parts)
Sending a Still Image File to an FTP
Server
If you select FTP send and click
image is captured and the captured image file is sent to
the FTP server specified on the FTP client setting page.
To use this function, you need to select the Enable
option and the Manual mode on the FTP client setting
page.
For details, see "Sending Images to FTP Server — FTP
client setting Page" on page 45.

Sending a Still Image via E-mail

If you select Mail send and click
image is captured and an E-mail with the captured image
file attached is sent to the E-mail address(es) specified
on the SMTP setting page.
To use this function, you need to select the Enable
option and the Manual mode on the SMTP setting page.
For details, see "Sending an Image via E-mail — SMTP
setting Page" on page 49.
24

Controlling the Application Manually

Recording a Still Image on a USB
Flash Memory or the Built-in
Memory of This Unit
If you select Memory save and click
still image is captured and stored in the memory
specified on the Image memory setting page.
To use this function, you need to select the Enable
option and the Manual mode on the Image memory
setting page.
For details, see "Recording Images in Memory — Image
memory setting Page" on page 53.

Controlling Alarm Output

If you select Alarm out 1, Alarm out 2, Alarm out 3 or
Alarm out 4 and click
to 4 of the I/O port on this unit manually. Each click
switches the relay between short-circuit and open
alternately.
To use this function, you need to set the Mode option of
the channel selected on the Alarm out setting page to
Manual.
For details, see "Setting the Alarm Out — Alarm out
setting Page" on page 52.
For the connection of peripheral devices to the Alarm
out of the I/O port, see "Pin Assignment and Use of I/O
Port" on page 69.
, the current still
Selecting the Day/Night Mode (EVI-
D70, SSC-DC590/DC690 only)
If you select Day/Night and click
the Day/Night mode. Each click switches between the
day mode and night mode.
To use this function, you need to select the Day/Night
mode menu on the Camera setting page to Manual.
For details, see "Setting the Camera — Camera setting
, the current still
Page" on page 32.
, the current
, you can control alarm out 1
, you can select