Panasonic AW-HE120K Operating Instructions Manual page 11

How to install and connect the unit
6
Connect the rear panel connectors.
Anchor the AC adaptor cable in place using the cable clamp.
 How to secure the DC plug 
 Loosely secure the cable clamp.
Cable clamp
7
Attach the cable cover.
  Fit the two tabs on the cable cover into the square mounting hole at either side of the rear panel.
  Secure the cable cover using the screw (M3  20 mm) provided.
Screw diameter
M3
Note
  Engage the tabs on the cable cover so they fit into place perfectly, and check that the cover is not rickety.
Cable clamp
Tab (one at either side)
Loosely secure the cable clamp
in the area shown above.
Clamping torque
0.78 N · m {8 kgf · cm}
(continued)
Square hole (one at either side)
LAN cable
LAN cable
HDMI cable
Coaxial cable
Coaxial cable
Coaxial cable
VGA cable
AC adaptor cable
Screw for cable cover (M3 screw)
(with flat washer, spring washer)
 Fasten the cable clamp.
Strap part
Take hold of the strap part, slide
the cable clamp until it stops
moving, and then secure it tightly.
11