HP 680n - JetDirect Print Server Administrator's Manual page 148

Table 4.12 Certificate Configuration Screens (3 of 3)
Organizational Unit. (Optional) Specify your department, division, or other
subgroup of your organization.
City/Locality. (Required) Enter the city or locality in which your organization is
located.
State/Province. (Required for all countries/regions) Must contain at least three
characters. (required)
Country/Region. Two-character ISO 3166 country/region code. For example,
use "gb" Great Britain or "us" for USA (required).
Install Certificate, or
Install CA Certificate
Use the "Install Certificate" screen to install a Jetdirect certificate.
Use the "Install CA Certificate" screen to install a trusted Certificate Authority (CA)
certificate for use during EAP/TLS authentication. (Wireless print servers only)
Install a PEM/Base64 (Privacy Enhanced Mail) encoded certificate.
To install a certificate, specify the name and path of the file that contains the
certificate. Or, click Browse to browse your system for the file.
Click Finish to complete the installation.
To install a certificate, it must be associated with a pending certificate request by
the embedded Web server. The Install Certificate option will not be presented if
there is no pending request.
A Jetdirect or CA certificate size is limited to 3 KBytes.
Import Certificate and Private Key
Use this screen to import a Jetdirect certificate and private key.
Import a Jetdirect certificate and private key. When imported, the existing
certificate and private key will be overwritten.
The file format must be PKCS#12 encoded (.pfx) and cannot exceed 4 KBytes.
To import a certificate and private key, specify the name and path of the file that
contains the certificate and private key. Or, click Browse to browse your system
for the file. Then enter the password that was used to encrypt the private key.
Click Finish to complete the installation.
Export the Jetdirect certificate and private key.
Use this screen to export the installed Jetdirect certificate and private key to a file.
To export a certificate and private key, enter a password that will be used to
encrypt the private key. You must enter the password again to confirm it. Then
click Save As to save the certificate and private key in a file on your system. The
file format will be PKCS#12 encoded (.pfx).
ENWW
Using the Embedded Web Server 148