Advertisement
Renewed Points through this
Renewed POI icon
Upgrade
Some facilities icons used in POI Search, Vicin-
ity Search, and Overlay POI will be changed.
If you upgrade your navigation system by this
disc, the system will have the following change;
Renewed Points for AV Source
Renewal Map database
Source icon
The Map database will be changed.
The icon design for each source will be changed.
Wide variety of facility informa-
Some of "ESC" touch key
tion for Points of Interest (POI)
(except for AVIC-D1)
search
The name of the touch key will be changed from
You can search your destination from all areas.
"ESC" to "HIDE".
– Approximately 11 million POIs are included in
this database as of January 2005.
Renewed point in the MP3 oper-
– Some POI information may not be accurate or
ation screen (except for AVIC-
may become inaccurate through the passage of
D1)
time. Please directly contact the POI to verify the
accuracy of the information about the POI which
The folder icon has will be added to the "UP"
appears in this database. POI information is sub-
touch key.
ject to change without notice.
The file extension (.mp3) will be displayed after a
track in the track list display and detail Informa-
Change zone name
tion display. (The extension may not be displayed
NF ➞ NL (NEWFOUNDLAND AND LABRADOR
if the file name is long.)
of CANADA)
Appearance changing (except
for AVIC-D1)
The appearance of the navigation menu and AV
menu will change as follows:
Navigation menu
AV menu
How to Upgrade Your Naviga-
AVIC-D1:
tion
The program is installed to the navigation system
using the application disc. When installing the
program, you carry out the following operations.
When all the setup procedures are completed,
you can use the navigation system.
The screen images used in this section are AVIC-
When the upgraded program has been found,
N2 as an example.
installation of the program starts immediately.
❒ If you cannot insert a disc completely or if
1
Park your vehicle in a safe place.
an inserted disc is not recognized, check
Leave the engine on, and make sure that the
that the label side of the disc is up. Press
parking brake is applied.
the EJECT (or DVD-ROM EJECT) button
2
to eject the disc, and check the disc for
Remove the current disc.
damage before inserting the disc again.
AVIC-N1, AVIC-N2:
Press the EJECT button.
• Once the installation of the program starts,
do not stop the engine of your vehicle nor
switch off the navigation system until the
installation is completed and the following
Audio screen appears.
AVIC-D1:
Press and hold the OPEN/CLOSE button
to open the LCD panel and then press the
DVD-ROM EJECT button.
4
Press the NAVI/AV button to change the
navigation screen.
(If you use AVIC-D1, press the MAP but-
ton.)
5
Touch "Yes/Oui".
3
Insert the new Pioneer DVD Map Disc
When you start the navigation system for the
into the appropriate slot.
first time, you will see a confirmation message
AVIC-N1, AVIC-N2:
asking if you wish to select another language.
English is the default language of the naviga-
tion system. If desired, you can select another
language as shown.
❒ To keep English, touch "No/Non". After
this, proceed to Step 8.
❒ When you want to select another lan-
guage, touch "Yes/Oui", and proceed to
the next step.
6
9
Select the language from the list.
To set the time difference, touch "+" or
Touch the language you want to use.
"–".
❒ The language selected here is reflected for
Time difference
the navigation functions (e.g., Destination
The time difference between the time origi-
search, etc.) only.
nally set in the navigation system (Pacific
Installation of the program, in the language
Standard Time) and the current location of
you chose, begins.
your vehicle is shown. If necessary, adjust the
time difference. Touching "+" or "–" changes
the time difference display in one-hour incre-
ments. The time difference can be set from
+3 to –3 hours.
10
If necessary, set to summer time.
Daylight Saving Time (DST) is off by default.
When the installation is complete, the open-
Touch "Summer Time" to change the time if
ing display appears.
you are in the daylight saving period. This
turns the display below summer time "On".
11
7
Press the NAVI/AV button to change the
To complete the setting, touch "Back".
navigation screen.
(If you use AVIC-D1, press the MAP but-
ton.)
Some time is needed until navigation is ready.
8
Check the details of the cautionary mes-
sage and touch "OK".
The map of your surroundings appears.
Advertisement
