Routing The Cables - HP 245161-B22 - 10642 42U Rack Shock Pallet Reference Manual

Routing the Cables

1. Bundle the cables with the cable arm extended, including the power cord.
2. Secure the cables to the cable management arm with the fasteners provided.
NOTE: Leave enough slack in the cables so that you can bend the cable management
arm easily.
3. Route the bundled cables over the top of the cable management arm and down
the cable conduit, if present.
Figure 4-18: Routing the cables for server/storage
applications
4. Remove the cable access panel, if present.
HP 10000 Series Rack Reference Guide
Installing Components
4-23