Yamaha 01X Supplementary Manual page 17

2) Adjust the send levels
q Select the desired audio channel.
Use the [SEL] buttons (and the BANK [</>] (Left/
Right) buttons, if necessary). Note that the display
windows in Cubase SX 3 change as well — letting you
directly select the Channel Settings window for any
track.
• Only audio channels can be controlled from the 01X. MIDI chan-
nels (and MIDI effects) can be called up, but effect control is not
implemented. However, keep in mind that you CAN control EQ
and effects of the plug-in instruments (see below).
Controlling effects for plug-in instruments
• Even though the plug-in instruments (plug-in synthesizers, drum
machines, samplers, etc.) are technically MIDI instruments, their
audio signals are fair game for processing with the EQ and
effects. To control these from the 01X, use the BANK [ < / > ]
(Left/Right) buttons (if necessary) and the [SEL] buttons to select
the appropriate plug-in audio channel. (Make sure NOT to select
the normal MIDI track channel here.)
w In Cubase SX 3, make sure that the desired track is
selected, then click on the Sends bar in the Inspector to
show the active sends.
e Click on the dark box labeled "s1" and select the FX
Channel you created.
r Call up the Send parameters by pressing
the [SEND] button.
t From Page 1, use the knobs to adjust the
effect send level for each effect (1 - 8).
Level Level Level Level
FX Send Full Kit
Level Level Level Level
Page:01/04
Recording/Playback/Remote Control
y If necessary, turn the desired effect on or off.
Call up Page 2 of the Send parameters with the DIS-
PLAY [ / ] (Up/Down) buttons, then use the corre-
sponding knob to turn the effect (1 - 8) for the channel
on or off.
FXOn FXOn FXOn FXOn
FX Send Full Kit
Select other pages in the Send parameters with the
DISPLAY [ / ] (Up/Down) buttons and make the
appropriate settings as needed:
Page 3: Pre/Post
Page 4: FX bus
3) Change the effect settings
q Press the [EFFECT] button.
Each press of the [EFFECT] button toggles between
MFX (Master) and FX (Send).
w If multiple FX Channel tracks have been created, use
the channel 1 knob to select the desired FX track, 1 - 8.
The effect name is shown at the top of the LCD. If the
effect slot has no effect, "No Effect" is shown.
e Use the DISPLAY [ / ] (Up/Down) buttons to select
the effect parameter pages.
Some effects have few pages (3 or 4), others have
many. (Some effects, such as Steinberg Step Filter, fea-
ture several dozen parameter pages.)
FX 1 On RoomWorks
Send FX
r Use the knobs to adjust the parameters.
• You can also select plug-in instrument channels for audio pro-
cessing (EQ, and effects). (See the Hint above, "Controlling
effects for plug-in instruments.")
• For ease in editing, you may want to call up the particular effect
edit window so that you can see the parameters in Cubase SX 3
as you tweak them. For the Send Effects, click the appropriate
"e" button in the right column of effects in the Channel Settings
window.
01X Owner's Manual (Supplementary Manual)
FXOn FXOn FXOn FXOn
Page:02/04
Default Program
Page:01/04
81