Advertisement
System Requirements
ANT24-Series
Based
EIRP limitaton:
point to multi-point
ETSI
point to point
point to multi-point
FCC
30+6(antenna gain ) dBm
then above 30dBm, one dB output
point to point
power reduced, then 3dB antenna gain
increased
For outdoor use
Cable Loss
Model
ANT24-CB03N
ANT24-CB06N
ANT24-CB09N
ANT24-ODU03M
ANT24-ODU1M
ANT24-ODU3M
ANT24-DLK3M
Note:
1. The loss value includes two connectors ( around 0.3~0.4dB @ 2.4GHz, 0.39~0.52dB @ 5GHz).
2. The longer cable you use, the more attenuation it causes, therefore, the extended range might be
shorten then a normal link with default cables.
3. To comply with EU regulation, please use longer cables which can cause enough attenuation value.
4. For more detail of connectors type, please refer to the appendix page.(P.34)
4
2.4GHz~2.5GHz
20dBm ave.
23dBm peak.
36dBm
EIRP = Effective,Isotropic Radiated Power
= Device Output Power + Antenna Gain - Cable Loss
Cable Type
Length
LMR400
3m
LMR400
6m
LMR400
9m
LMR200
0.3m
LMR400
1m
LMR400
3m
LMR200
3m
RP SMA plug to N plug
ANT4-0700 Install Guide
5.15GHz~5.35GH z
5.47~5.725
23dBm
30dBm
23dBm
X
Cable loss (dB)
Interface
N plug to N jack
N plug to N jack
N plug to N jack
RP N plug to N plug
RP N plug to N plug
RP N plug to N plug
5.75GHz~5.875GHz
X
36dBm
30+23(antenna gain)
then above 30dBm, one dB output power
reduced, then 3dB antenna gain increased
Cable loss(dB)
@ 2.4GHz
@5GHz
1
1.75
1.85
2.7
2.6
3.8
0.6
1.15
0.6
1.15
1
1.75
2
3.45
Advertisement
