Table of Contents
Advertisement
System Status LEDs
You can monitor the basic operation of the gateway and network interfaces by
checking their status LEDs. The system status LEDs are located on the front
panel of the gateway.
Figure 4 System Status LEDs for the Nokia 5i and Nokia 10i
Table 5
Table 5 System Status LEDs for the Nokia 5i and Nokia 10i
LED
PWR
STAT
Nokia 5i and 10i Installation Guide
describes the LEDs on the Nokia 5i and Nokia 10i front panel.
Description
Off: Device not powered on.
Steady green: Device is on.
Off: Device off.
Steady green: Device passed hardware test and finished booting.
Steady red: Hardware or software error. No recognizable boot
device with a valid kernel found, or kernel panic.
Steady amber: Booting.
Blinking green: Device passed hardware check and is fully booted.
Software is operating normally.
Performing the Initial Hardware Configuration
3
2
1
00418
31
Advertisement
Table of Contents
