Ibm/As400; Other Systems - Brother 2100P - NC Print Server User Manual

IBM/AS400

To use a Brother print server with an IBM AS/400 running IBM's TCP/IP gateways
services for OS/400 (the OS/400 system must be v3.1 or later)
Use the CFGTCP command at your OS/400 prompt to add the print server's TCP/IP
address to the AS/400 host table.
Use the following one-line OS/400 command to create the LPD queue:
CRTOUTQ OUTQ(<queuename> RMSTSYS
(*INTNETADR) RMTPRTO(<service>)
AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE (*OTHER)
MFRTYPMDL (<driver>)
INTNETADR('<ipaddress>') TEXT
('<description>')
where <queuename> is the new AS/400 print queue name, <service> is the print
server service name, BINARY_P1 or TEXT_P1, <driver> is the OS/400 printer
driver name (*HP4 is recommended if in doubt), and <ipaddress> is the IP address
of the print server. Note that the IP address and description must be enclosed in
single quotes.

Other Systems

Other systems use similar programs to set up Print servers. These programs will
generally ask for the following information:
Requested information:
remote printer
remote host computer name
remote host IP address
Technical support specialists for these companies can usually answer configuration
questions if you provide them with the equivalent UNIX configuration information
(tell them that the print server looks like a remote UNIX host computer running the
lpd line printer daemon).
You should use:
Binary or Text service name
Any name (must match the name in the
printcap file, if any) or in some cases,
you may enter the print server IP
address here
IP address of print server.
1-10
CHAPTER 1 UNIX PRINTING