Understanding The Ethernet Configuration Pages (External Print Servers) - HP 300X - JetDirect Print Server Administrator's Manual

Understanding the Ethernet
Configuration Pages (External Print
Servers)
This section describes the Ethernet/802.3 configuration page for
HP Jetdirect external print servers.
The networking section of each configuration page is divided into
sections. The item numbers in the following table correspond to the
callouts in Figures
Table 6.1 External Print Server (1 of 2) Configuration Pages
Item Description
1 HP Jetdirect product
information (Table 7.1)
2 HP Jetdirect print server
status information
(Table 7.2)
3 Network statistics
(Table 7.3)
4 Novell NetWare status
information (Table 7.4)
5 DLC/LLC configuration
messages (Table 7.5)
6 TCP/IP status
information (Table 7.6)
64 Troubleshooting the HP Jetdirect Print Server
6.2 and 6.3.
Troubleshooting Information
Firmware revision number, type of
network (Ethernet), LAN hardware
address, port selection type, active
ports (three-port print servers), speed,
and manufacturing identification
number.
Lists error conditions or Ready.
Packets received, framing errors,
transmit collisions, and other network
statistics.
Novell NetWare frame types received.
May indicate if the print server is locking
onto the wrong frame type, that multiple
frames are using the same network
number, and more.
Status for the DLC/LLC protocol.
TCP/IP status, IP address, BOOTP
server, and other configuration
information.
ENWW