Mac Os X - Brother HL-2220 Quick Setup Manual

You can download the latest drivers and utilities for your machine from
the Brother Solutions Center at http://solutions.brother.com/.
Windows
®
For
5
Before you install For USB Interface Cable Users
a.
Turn off the machine and make sure the
Make sure that your computer is ON and
USB interface cable is NOT connected to the
you are logged on with Administrator
machine, and then begin installing the printer
rights.
driver. If you have already connected the cable,
disconnect it.
IMPORTANT
• If there are any programs running, close
them.
• The screens may differ depending on
your operating system.
Note
5
• For Windows Vista ® and Windows ® 7
For Wired
users, when the User Account Control
screen appears, click Allow or Yes.
Network Cable
• Depending on your security settings, a
Windows Security or antivirus software
Users
window may appear when using the
machine or its software. Please allow or
(HL-2250DN
permit the window to continue.
only)
• XML Paper Specification Printer Driver
The XML Paper Specification Printer
Driver is the most suitable driver when
printing from the applications that use
the XML Paper Specification documents.
Please download the latest driver by Note
accessing the Brother Solutions Center at
If you are going to connect the
http://solutions.brother.com/.
machine to your network, we
recommend that you contact
your system administrator prior to
installation.

Mac OS X

For
5
Before you install For USB Interface Cable Users
a.
Connect the USB
cable to the USB
IMPORTANT
connector marked with
• For the latest drivers and information
a symbol, and then
on the Mac OS X you are using, visit
connect the cable to your
http://solutions.brother.com/.
Macintosh.
• For Mac OS X 10.4.0 to 10.4.10 users,
upgrade to Mac OS X 10.4.11 - 10.6.x.
Make sure your machine is plugged in and
IMPORTANT
your Macintosh is switched ON. You must
• DO NOT connect the printer to a USB port on a
be logged on with Administrator rights.
keyboard or a non-powered USB hub.
• Connect the printer directly to your computer.
b.
Make sure the machine power switch is on.
5
For Wired Network Cable Users (HL-2250DN only)
a.
Remove the protective cap
from the LAN connector.
Install the printer driver
b.
Put the installation CD‑ROM into your CD‑ROM drive. If prompted,
select your model and language.
Note
If the Brother screen does not appear automatically, go to My Computer
(Computer), double‑click the CD‑ROM icon, and then double‑click start.exe.
For Peer-to-Peer network users
a. b.
Remove the protective
cap from the LAN
connector.
TCP/IP TCP/IP
Router
a
Machine
b
c.
For shared network users
Install the printer driver
a.
Put the installation CD‑ROM into your CD‑ROM
drive. If prompted, select your model and
TCP/IP
language.
Note
Client computer
a If the Brother screen does not appear automatically,
Also known as "Server" or "Print server"
b go to My Computer (Computer), double‑click the
TCP/IP or USB
CD‑ROM icon, and then double‑click start.exe.
c
Machine
d
d.
Install the printer driver Double‑click the
Follow the on‑screen instructions.
c.
Put the installation CD‑ROM into your
CD‑ROM drive.
Note
It may take a few minutes for installation to
complete.
b. e.
Connect the network cable Install the printer driver Double‑click the
to the LAN connector Follow the on‑screen instructions.
d.
Put the installation
marked with a symbol
CD‑ROM into your
and then connect it to a
CD‑ROM drive.
free port on your hub.
Note
It may take a few minutes for installation to
c.
Make sure the machine complete.
power switch is on.
c. d.
Click Install Printer Driver, and click Yes if Follow the on‑screen instructions until
you accept the license agreement. this screen appears.
Connect the network cable to the LAN Install the printer driver
connector marked with a symbol
d.
Put the installation CD‑ROM into your CD‑ROM
and then connect it to a free port on
drive. If prompted, select your model and
your hub.
language.
Note
If the Brother screen does not appear automatically,
go to My Computer (Computer), double‑click the
CD‑ROM icon, and then double‑click start.exe.
Make sure the machine power switch
is on.
b.
Click Install Printer Driver, and click Yes if
you accept the license agreement.
e.
Start Here OSX icon. Follow the on‑screen instructions until this
screen appears. Choose your machine from
the list, and then click OK.
f.
Start Here OSX icon. Follow the on‑screen instructions until this screen
appears. Choose your machine from the list, and then
click OK.
Note
• If there is more than one of the same model connected on
your network, the MAC Address (Ethernet Address) will be
displayed after the model name.
• You can find your machine's MAC Address (Ethernet
Address) and IP Address by printing out the Printer
Settings Page. See Print the Printer Settings Page on the
right.
e.
Connect the USB cable to the USB connector
marked with the symbol, and then
connect the cable to the computer.
e. f.
Click Install Printer Driver, Follow the on‑screen instructions to
and click Yes if you accept the complete setup.
license agreement.
Note
You can find your machine's IP Address
and the node name by printing out the
Printer Settings Page. See Print the
Printer Settings Page below.
c.
Follow the on‑screen instructions until this screen appears. Choose your
machine's queue, and then click OK.
Note
Contact your administrator if you do
not know the location or the name of
the machine queue on the network.
f.
Click Next.
Finish
The installation is
now complete.
Note
When the Brother Support screen appears,
make your selection and follow the on‑screen
instructions.
g.
Click Next.
The installation
Finish
is now complete.
Note
If you use a specified IP Address
Note
for the machine, you must set the
When the Brother Support
Boot Method to Static by using
screen appears, make your
the BRAdmin Light. For more
selection and follow the
information, see Changing your
on‑screen instructions.
machine's network settings in the
Network User's Guide.
f.
Turn the machine
Finish
on, and follow
the on‑screen
instructions to
The installation is
complete setup.
now complete.
The installation is
Finish
now complete.
Note
If you use a specified IP Address
for the machine, you must set the
Boot Method to Static by using the
BRAdmin Light. For more information,
see Changing your machine's network
settings in the Network User's Guide.
d.
Follow the
Finish
on‑screen
instructions to
complete setup.
The installation is
now complete.
Print the Printer
Settings Page
The Printer Settings Page lists all
the current printer settings, including
network settings.
a.
Make sure that the front cover
is closed and the power cord is
plugged in.
b.
Turn on the machine and wait until
the machine is in the Ready state.
c.
Press Go three times within 2
seconds. The machine will print
the current printer settings page.
Note
For Network Users
If the IP Address on the Printer
Settings Page shows 0.0.0.0, wait for
one minute and try again.
Brother CreativeCenter
Get inspired. If you're using
Windows, double‑click the Brother
CreativeCenter icon on your desktop
to access our FREE web site with
many ideas and resources for
personal and professional use.
Mac users can access Brother
CreativeCenter at this web address:
http://www.brother.com/creativecenter/