Maintenance - Sanyo mpr-214f - Commercial Solutions Refrigerator Instruction Manual

MAINTENANCE

WARNING
Always disconnect the power supply to the unit prior to any repair or maintenance of the unit in
order to prevent electric shock or injury.
Ensure you do not inhale or consume medication or aerosols from around the unit at the time of
maintenance. These may be harmful to your health.
Cleaning
• Clean the unit once a month. Regular cleaning keeps the unit looking new.
• Use a dry cloth to wipe off small amounts of dirt on the outside and inside of the unit and all accessories.
If some of them are dirty, use a cloth containing diluted neutral dishwashing detergent (Undiluted
detergent may break the plastic parts.
detergent). When a diluted neutral dishwashing detergent is used, wipe the cabinet or accessories
thoroughly with a cloth soaked in clean water. Then wipe the cabinet or accessories unit with a dry cloth
to eliminate the moisture.
• Never pour water onto or into the unit. Doing so can damage the electrical insulation and may cause
electric shock or short circuit.
• The compressor and other mechanical part are completely sealed. This unit requires absolutely no
lubrication.
Replacement of lamp
Follow the procedure below at the time of
replacement of the lamp. The lamp is located at
the upper front side of refrigerator chamber. (Fig. 1)
1. Disconnect the power supply plug.
2. To remove the lamp cover, hold the both sides of
the cover with flexure and push it toward. (Fig. 2)
3. Remove the bulb from the socket by turning it to
counterclockwise. (Fig. 3)
Caution: Take care not to injure the fingers as the
bulb can be hot!
< Bulb for replacement >
Incandescent lamp (T22E17) 125V, 10W (for 110V, 115V)
4. Mount a new bulb and replace the lamp cover.
For the dilution, follow the instruction enclosed with the
250V, 15W (for 220V, 230V, 240V)
21
Lamp
(inside)
Fig. 1
Lamp
cover
Fig. 2
Bulb
Fig. 3