Fujitsu 5015C - fi - Sheetfed Scanner Operator's Manual page 29

4. Load the documents on the ADF paper chute.
Set the documents face-up in the ADF paper chute with the upper edge
ATTENTION
of the documents downwards.
5. Adjust the side guides to the width of the documents.
Move the side guides so that they touch both sides of the documents.
If there is any clearance between the side guides and the edges of documents, the scanned
image may be skewed.
6. Scan the documents.
For how to scan the document, refer to "2.4 Scanning Documents" on page.18.
2.2 Loading Documents on ADF
fi-5015C Image Scanner Operator's Guide
2
15