(Optional) Configuring Ultrakey Plus Using The Web Browser; Logging Onto The Web Browser; Step 1: Configure Ultrakey Plus To Maxpro Mode; Figure 3-9 Ultrakey Plus Login Page - Honeywell HJK7000 Installation And User Manual

Installing UltraKey Plus with MAXPRO-Net

(Optional) Configuring UltraKey Plus Using the Web Browser

Logging onto the Web Browser

Step 1: Configure UltraKey Plus to MAXPRO Mode

50
1. If you have not already done so, navigate to, or copy and paste, the applicable IP
address into your web browser:
• LAN connections: for example, the default IP is http://192.168.1.9.
• Crossover cable connections - static address: http://192.168.1.9.
2. In the User Name field, enter Administrator (case sensitive).
3. In the Password field, enter 1234 (default).
4. Click Login.
Figure 3-9 UltraKey Plus Login Page
To configure the UltraKey Plus to MAXPRO mode:
1. Log onto the web browser.
2. From the top menu, click the Configuration tab. See
3. From the side menu, click the System Configurations tab.
4. From the System Mode drop down list, select MAXPRO.
5. From the System Language drop down list, select English.
6. Click Apply to save the configuration, Cancel to exit without saving, or Default to
restore all factory default values.
Figure 3-10.