Table of Contents
Advertisement
Installation Guide
Network Camera
WV-SF336, WV-SF335
Model No.
WV-SF332
WV-SF336E, WV-SF335E
WV-SF332E
(This illustration represents WV-SF336.)
Before attempting to connect or operate this product, please read these
instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Advertisement
Table of Contents
Related Manuals for Panasonic WVSF332 - IP NETWORK CAMERA
Summary of Contents for Panasonic WVSF332 - IP NETWORK CAMERA
-
Page 1: Installation Guide
Installation Guide Network Camera WV-SF336, WV-SF335 Model No. WV-SF332 WV-SF336E, WV-SF335E WV-SF332E (This illustration represents WV-SF336.) Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. - Page 2 WARNING: • Apparatus shall be connected to a mains sock- et outlet with a protective earthing connection. • The mains plug or an appliance coupler shall remain readily operable. • To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. •...
- Page 3 We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit den folgenden Normen oder normativen Dokumenten übereinstimmt.
-
Page 4: Table Of Contents
Contents Important safety instructions ......................5 Limitation of liability ........................6 Disclaimer of warranty ........................6 Preface ............................7 Main functions ..........................7 About notations ..........................7 About the user manuals ........................ 8 System requirements for a PC ...................... 9 Trademarks and registered trademarks.................. -
Page 5: Important Safety Instructions
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instruc- tions. -
Page 6: Limitation Of Liability
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:... -
Page 7: Preface
Preface The network cameras WV-SF330 series are designed to operate using a PC on a network (10BASE-T/100BASE-TX). By connecting to a network (LAN) or the Internet, images and audio from the camera can be moni- tored on a PC via a network. WV-SF336 • Maximum image capture size (1 280 x 960 (Aspect ratio of 4:3), 1 280 x 720 (Aspect ratio of 16:9)) -
Page 8: About The User Manuals
Important: • When the wide dynamic range function is activated, noise may be increased in the dark area of the object. Auto focus (AF) function SF336 It is possible to adjust the focus automatically by moving the focus ring of the lens with the opera- tion button of this camera or the setup menu. Focus assist (F. A.) function SF335 SF332 During the manual focus adjustment, this function indicates the best focus position. -
Page 9: System Requirements For A Pc
System requirements for a PC ® CPU: Intel Core 2 Duo 2.4 GHz or faster recommended Memory: 512 MB or more (A minimum of 1 GB memory is required when using ® ® ® ® Microsoft Windows 7 or Microsoft Windows Vista Network Interface: 10BASE-T/100BASE-TX 1 port... -
Page 10: Trademarks And Registered Trademarks
Trademarks and registered trademarks • Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Intel and Intel Core are trademarks or registered trademarks of Intel Corporation in the United States and other countries. • Adobe, the Adobe logo, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • SDHC logo is a trademark. • Other names of companies and products contained in these operating instructions may be trademarks or registered trademarks of their respective owners. -
Page 11: Precautions
Precautions Refer installation work to the dealer. Avoid installing this bracket in the loca- Installation work requires technique and experi- tions where salt damage occurs or corro- ences. Failure to observe this may cause fire, sive gas is produced. electric shock, injury, or damage to the prod- Otherwise, the mounting portions will deterio- uct. - Page 12 Turn the power off when cleaning of this Product disposal/transfer product. Images saved on the SDHC/SD memory card Failure to observe this may cause injury. may lead to personal information leakage. When it is necessary to dispose or give this [Precautions for use] product to someone, even when for repair, This product is designed to be used...
- Page 13 AVC Patent Portfolio License • When using an unformatted SDHC/SD This product is licensed under the AVC Patent memory card, format it using this camera. Portfolio License for the personal and noncom- Recorded data on the SDHC/SD memory card will be deleted when formatted. If an mercial use of a consumer to (i) encode video unformatted SDHC/SD memory card or an in compliance with the AVC Standard ("AVC...
-
Page 14: Precautions For Installation
Precautions for Installation Installation work shall be performed in accordance with the technology standard of the electric installation. This camera is designed to be used Be sure to remove this product if it is not indoors. in use. This product is not operable outdoors. Do not expose this camera to direct sunlight for Shielded (STP) LAN cables must be used hours and do not install the product near a... - Page 15 Radio disturbance When this product is used near TV/radio anten- na, strong electric field or magnetic field (near a motor, a transformer or a power line), images may be distorted and noise sound may be pro- duced. PoE (Power over Ethernet) Use a PoE hub/device that is compliant with IEEE802.3af standard.
-
Page 16: Major Operating Controls
Major operating controls Dome cover Inner dome Clear dome (Provided only for service) Direction marker for installation Monitor out connector for service* Azimuth adjustment ring Marker FRONT Monitor out connector for adjustment MONITOR (RCA jack) View from the side BASE-T/ BASE TX LOCK Tilting table... -
Page 17: Side View
<Side view> SDHC/SD memory card slot Access indicator (blinking at accessing) Link indicator (lighting at linking) Focus assist (F.A.) Auto focus (AF) button INITIAL SET button SF335 SF332 button SF336 FOCUS ASSIST SDHC/SD memory card error indicator/AF indicator (Blinks when AF is being adjusted) SF336 SDHC/SD memory card error... -
Page 18: Detaching The Dome Cover
Detaching the dome cover Important: • After removal, retain the dome cover fixing screw so as not to lose. The screw is required when attaching the dome cover. (☞ Page 34) • Remove the cover film from the dome section of the dome cover after the installation is com- plete. Do not touch the dome section by hand directly after removing the cover film. Remove the dome cover fixing screw (M3, LOCK OPEN... -
Page 19: Preparations
Preparations When installing the camera on a wall or a ceiling, there are four methods as specified below. (☞ Pages 20 and 21). • Using the two-gang junction box • Installing the camera directly on the ceiling or wall • Using the optional ceiling mount bracket WV-Q168 (for embedded installation on a ceiling) • Using the optional ceiling mount bracket WV-Q105* (for direct mounting on a ceiling) Important: • Procure 4 screws (M4) to secure the camera to a wall or a ceiling according to the material of the installation area. -
Page 20: Method Of Camera Installation
Using the side cable access hole When installing the camera directly on the ceiling or wall with cables exposed or when using the optional ceiling mount bracket WV-Q168, cut out a portion of the dome cover to open a cable access hole. - Page 21 Installing the camera directly on the ceiling or wall Place the installation template label (accessory) on the ceiling or wall, and make a hole to pass the cable. Remove the template label, and mount the camera by fixing 4 screws (locally procured). (☞ Page 28 ) Side cable access hole Direction marker for installation...
-
Page 22: Insert/Remove An Sdhc/Sd Memory Card
Insert/remove an SDHC/SD memory card Important: • Before inserting the SDHC/SD memory card, turn off the power of the camera first. • When inserting an SDHC/SD memory card, make sure the direction. • Before removing the SDHC/SD memory card, select "Not use" for "SD memory card" on the [SD memory card] tab of the setup menu first. Turn off the power after "Not use" selection, and then unload the SDHC/SD memory card. When the SDHC/SD memory card is inserted or removed with the power on, data in the SDHC/SD memory card may be damaged. -
Page 23: Connection
Connection Caution: • FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. Before starting the connection, turn off the power of this camera and the devices to be connected. Check and prepare the required devices and cables for connection. Note: • Since the connector storage section does not have a suffi- cient space, use audio cables and a LAN cable that do not 9 mm... - Page 24 Important: • Connect/disconnect the audio cables and turn on the power of the camera after turning off the power of the audio output devices. Otherwise, loud noise may be heard from the speaker. Connect an external speaker with amplifier to Audio output the audio output connector (for use of the audio connector transmission function). Connect a stereo mini plug (ø3.5 mm) (monau- ral output).
- Page 25 Important: • Do not connect 2 wires or more directly to a terminal. When it is necessary to connect 2 wires or more, use a splitter. • Connect an external device with verifying that the ratings are within the specifications above. • When using the EXT I/O terminals as the output terminals, ensure they do not cause signal col- lision with external signals. • ALARM OUT, AUX OUT Output specification: Open collector output (maximum applied voltage: 20 V DC) Open: 4 V - 5 V DC by internal pull-up Close: Output voltage 1 V DC or less (50 mA or less) • ALARM IN Input specification: No-voltage make contact input (4 V - 5 V DC, internally pulled up) OFF: Open or 4 V - 5 V DC...
- Page 26 Important: • Be sure to use the power cord plug provided with this product. • Be sure to fully insert the power cord plug into the 12 V DC power supply terminal (accessory). Otherwise, it may damage the camera or cause malfunction. • Be sure to use an AC adaptor compliant with the Specifications regarding power source and power consumption (☞ page 39). t Run the 12 V DC output cable through the gap of the cable hook. 12 V DC output cable Cable hook When using PoE (IEEE802.3af compliant)
- Page 27 Connection example when connecting to a network using a PoE hub Video monitor (for adjustment use only) Speaker with amplifier PoE device (hub) (option) LAN cable (category 5 or better, straight, STP*) LAN cable (category 5 or Microphone (option) better, straight, STP*) Speaker with amplifier (option) LAN cable (category 5 or...
-
Page 28: Installation
Installation Camera mounting Installation shall be conducted after turning off each device. Detach the dome cover. (☞ Page 18) Connect the cables to the camera. (☞ Pages 23 to 27) As necessary, use a cable tie (accessory) to assemble the cables. Mount the camera. -
Page 29: Adjustment
Adjustment Adjust the camera angle. When determining the camera angle, repeat fine adjustments by gradually moving the panning table, tilting table, and azimuth adjustment ring. Horizontal position (Panning) Loosen the panning lock screw, rotate the panning table to adjust the pan direction. (Adjustable range: 350 °) Panning is possible within the range of 180 °... - Page 30 Note: • When the camera is used at an angular field of view that is close to horizontal, it must be noted that the shadow of the dome cover may be projected. Image tilt adjustment Rotate the azimuth adjustment ring to adjust the azimuth angle of the image. (Adjustable range: ±100 °) Adjustable range –100 ° +100 ° FRONT MONITOR BASE-T/ BASE TX LOCK...
- Page 31 w When the auto focus (AF) button on the lateral side of camera is pressed, the auto focus (AF) indicator will light for around 10 seconds, and the focus is automatically adjusted. Important: • Do not move the focus ring. Note: • If the zoom lock knob is slightly fastened before the zoom ring is moved, the ring will become stable to ease the fine adjustment. • When positioning the zoom ring at a step short of the "T" (or "W") end, the focus adjustment will be easier.
- Page 32 Adjust the angular field of view and the focus. SF335 SF332 The angular field of view and focus can be adjusted in accordance with the distance between the camera lens and a photographic subject. These adjustments shall be performed together with the camera angle adjustment.
- Page 33 Note: q When shooting the following subjects, close the "FOCUS ADJUSTMENT" menu by pressing the focus assist (F.A.) button again, or adjust the focus to obtain the best focus position while monitoring images from the camera. • Subj. moving frequently or having large illuminance change • Subj. with low illuminance • Subj. with reflection or extra brightness • Subj. through a window • Place where the lens easily becomes dirty...
-
Page 34: Attaching The Dome Cover
Attaching the dome cover Marker Align the indication "OPEN" to the maker of the camera to attach the dome cover. Dome alignment indication "OPEN" Dome cover Dome section Remove the cover film from the dome cover except the dome section. Adjust the direction of the inner dome (☞... - Page 35 Important: • For inner dome adjustments, adjust the marker to the "ADJUST" position. If the dome section is moved with unreasonable force from the "LOCK" position, this may be a cause of destruc- tion. Rotate the dome cover clockwise to adjust the marker to "LOCK". Fix the dome cover and camera by tighten- ing the dome cover fixing screw (M3, step LOCK OPEN...
-
Page 36: Configure The Network Settings
When using multiple cameras, it is necessary to configure the network settings of each camera independently. If the Panasonic IP setting software does not work, configure the network settings of the camera and the PC individually on the "Network" page of the setup menu. Refer to the Operating Instructions (PDF) for further information. - Page 37 Start the Panasonic IP setting software. Click the [IP setting] button after selecting the MAC address/IP address of the camera to be configured. Note: • When using a DHCP server, the IP address assigned to the camera can be displayed by clicking the [Refresh] button of the IP setting software.
-
Page 38: Troubleshooting
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Reference Symptom Cause/solution pages When using DC power supply... -
Page 39: Specifications
Specifications ● Basic Power source: 12 V DC, PoE (IEEE802.3af compliant) Power consumption: WV-SF336 12 V DC*: 320 mA, PoE: 4.2 W (Class 2 device) WV-SF335, WV-SF332 12 V DC*: 280 mA, PoE: 3.5 W (Class 2 device) * FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. - Page 40 WV-SF332 (800×600) Color: 0.2 lx {0.02 footcandle} (F1.4, Auto slow shutter: Off (1/30 s), AGC: High) 0.013 lx {0.0013 footcandle} (F1.4, Auto slow shut- ter: max. 16/30 s, AGC: High)* 0.13 lx {0.013 footcandle} (F1.4, Auto slow shutter: Off (1/30 s), AGC: High) 0.009 lx {0.0009 footcandle} (F1.4, Auto slow shut- ter: max.
- Page 41 Resolution: Aspect ratio: 4:3 (WV-SF332) H.264 800 × 600/VGA (640 × 480)/QVGA (320 × 240), max. 30 fps MPEG-4 VGA (640 × 480)/QVGA (320 × 240), max. 30 fps JPEG 800 × 600/VGA (640 × 480)/QVGA (320 × 240), max. 30 fps Aspect ratio: 16:9 H.264...
-
Page 42: Standard Accessories
Up to 16 camera images can be displayed simultaneously on a multi-screen. Compatible SDHC/SD memory card (option): Manufactured by Panasonic SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 256 MB, 512 MB, 1 GB, 2 GB (except miniSD card and microSD card) *1 Either H.264 or MPEG-4 is selectable. - Page 43 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
- Page 44 Panasonic Marketing Europe GmbH Three Panasonic Way, Secaucus, Winsbergring 15, 22525 Hamburg F.R.Germany New Jersey 07094 U.S.A. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca © Panasonic System Networks Co., Ltd. 2010 Ns0410-0/1 3TR006433AZA Printed in China...