Table of Contents
Advertisement
ASUS GUI RAID Manager: Array Management
4 4 Scanning in a drive
1. Display the Physical Drives window by clicking on the
Physical Drives command button or selecting the Physical
Drives command from the Open menu.
2. From the Physical Drives window, double-click on the
connector corresponding to the SCSI ID of the drive being
scanned. A confirmation message similar to the following
will appear on the screen:
3. Click OK.
specified ID and then will display either a successful
message or an error message.
4. Click OK.
The GUI RAID Manager will place a drive icon on the
respective connector if the scanning process is successful.
4-18
The system will scan for a drive with the
4.7
Scanning in Drives
Advertisement
Chapters
Table of Contents
