Page 1 Hardware Guide HP Tablet PC Series Document Part Number: 331734-001 October 2003 This guide explains how to identify, use, modify, and maintain the hardware features on the tablet PC and keyboard. It also includes power, networking, and environmental specifications, which may be helpful when traveling with the tablet PC.
Page 2 © 2003 Hewlett-Packard Development Company, L.P. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and/or other countries. SD Logo is a trademark. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Page 3: Table Of Contents
Contents 1 External Components Pen Components....... . 1–1 Tablet PC Components ......1–2 Front: Lights and Bluetooth.
Page 4 Contents Additional Tablet PC Standard Components ..1–19 Documentation CDs ......1–20 Cords and Cables .
Page 5 Contents 3 Battery Packs Running the Tablet PC on Battery Power ... . 3–1 Replacing a Battery Pack ......3–2 Removing a Battery Pack .
Page 6 Contents 4 Drives Adding a Drive to the System ..... 4–1 Understanding Drive Terms..... . . 4–2 Terms for Types of Drives.
Page 7 Contents 6 Internal Modem Connecting the Modem ......6–2 Selecting Connectors ......6–2 Connecting the Modem to an RJ-11 Jack .
Page 8 Contents 9 Additional Hardware Options Obtaining Upgrades ......9–1 Using a PC Card....... . 9–1 Selecting a PC Card.
Page 9 Contents 11 Specifications Tablet PC and Tablet PC Keyboard Dimensions..11–1 Tablet PC Operating Environment....11–2 Tablet PC Rated Input Power..... 11–2 Modem Specifications .
Page 10: External Components
External Components Pen Components Component Description Pen tip Interacts with the tablet PC whenever the tip is touching the screen or within 1.27 cm (0.5 inch) of the screen. When tapped on or held over a pen-activated button, activates the button.
Page 11: Tablet Pc Components
External Components Tablet PC Components Front: Lights and Bluetooth Component Description AC adapter light On: AC power is being supplied through the AC adapter. Battery light On: A battery pack is charging. Flashing: A battery pack that is the only available power source has reached a low-battery condition.
Page 12: Front: Pen-Activated Buttons
External Components Front: Pen-Activated Buttons Component Description Tablet PC Input Panel launch When Windows is running, opens the button* Microsoft Tablet PC Input Panel application, which includes a handwriting pad and an on-screen keyboard. Journal launch button* When Windows is running, opens and closes the Microsoft Journal application, which supports handwriting.
Page 13: Right Side: Power Switch And Power/Standby Light
External Components Right Side: Power Switch and Power/Standby Light Component Description Power switch* When the tablet PC is: ■ Off: Turns on the tablet PC. ■ On: Initiates Standby.* ■ In Standby: Resumes tablet PC from Standby. ■ In Hibernation: Resumes tablet PC from Hibernation.* If the system has stopped responding and Windows shut down procedures...
Page 14: Right Side: Windows Security And Display Toggle Buttons
External Components Right Side: Windows Security and Display Toggle Buttons Component Description Windows Security When pressed with the pen tip or a small button* object like the end of a paper clip while: ■ Windows is open, enters the ctrl+alt+delete †...
Page 15: Right Side: Esc, Tab And Q Menu Buttons
External Components Right Side: Esc, Tab and Q Menu Buttons Component Description Esc button* While the tablet PC is: ■ Starting up and a flashing pointer is displayed on the screen, opens the Setup utility. ■ In Windows, functions like esc on a standard keyboard.
Page 16: Right Side: Jog Dial And Antenna
External Components Right Side: Jog Dial and Antenna Component Description Jog dial* Functions like enter and the up and down arrow keys on a standard keyboard. ■ Press inward to enter a command. ■ Rotate upward to scroll upward. ■ Rotate downward to scroll downward.
Page 17: Lower Side
External Components Lower Side Component Description Docking alignment slots (2) Secure the tablet PC to an optional Tablet PC Docking Station. Speakers (2) Produce stereo sound. Audio-out jack Connects optional stereo headphones or powered stereo speakers. Headset jack Connects an optional headset, such as a mobile telephone headset with a microphone and a monaural ear piece.
Page 18: Left Side: Attachment Slots And Keyboard Connector
External Components Left Side: Attachment Slots and Keyboard Connector Component Description Screen protector slots (2) Secure the screen protector* when it is attached to the tablet PC. Universal attachment Secure the portfolio, a screen slots (2) protector*, or an attachment, such as a tablet PC keyboard, to the tablet PC.
Page 19: Left Side: Security Cable Slot, Vent And Antenna
External Components Left Side: Security Cable Slot, Vent and Antenna Component Description IrDA Fast Infrared Port Transmits and receives infrared transmissions between the tablet PC and other infrared devices. Security cable slot Attaches an optional security cable to the tablet PC. Vent Allows airflow to cool internal components.
Page 20: Top: Connectors And Jacks
External Components Top: Connectors and Jacks Component Description USB connector Connects an optional USB 2.0- or 1.1-compliant device.* External MultiBay Connects an optional USB 2.0- or connector 1.1-compliant device.* RJ-11 telephone jack Connects a modem cable. RJ-45 network jack Connects an Ethernet network cable. External monitor Connects an optional VGA external monitor connector...
Page 21: Top: Pen Holder And Lan Connection Lights
External Components Top: Pen Holder and LAN Connection Lights Component Description Pen holder (shown with Secures the pen to the tablet PC. inserted) LAN connection lights (2) Both lights off: The tablet PC is not connected to a LAN. Both lights on: The tablet PC is connected to a LAN with a 100 Mbps link.
Page 22: Top: Card Slots, Buttons And Tether Eyelet
External Components Top: Card Slots, Buttons and Tether Eyelet Component Description PC Card slot Supports an optional Type I or Type II 32-bit (CardBus) or 16-bit PC Card. PC Card eject button Ejects an optional PC Card from the PC Card slot. Tablet PC tether eyelet Used with the tether eyelet on the pen, enables you to tether the pen to the...
Page 23: Back: Attachment Features And Hard Drive Bay
External Components Back: Attachment Features and Hard Drive Bay Component Description Docking connector Connects the tablet PC to an optional Docking Station. Docking restraint latch Accepts the docking restraint latch on recess an optional Docking Station to secure the tablet PC to the Docking Station. Attachment release switch Releases an attachment, such as the portfolio, a screen protector*, or an...
Page 24: Back: Battery Bay
External Components Back: Battery Bay Component Description Battery pack release latch Releases the battery pack from the battery bay. Battery quick check button on Activates the battery quick check lights battery pack* (see below) which display how much charge remains in the battery pack. Battery quick check lights (3) On: Each light represents a percent of on battery pack*...
Page 25: Back: Memory And Mini Pci Compartment
External Components Back: Memory and Mini PCI Compartment Component Description Memory and mini PCI Contains one memory slot for a (Peripheral Component PC133-compliant memory module. Interconnect) Also, holds an optional mini PCI board compartment, not visible such as a wireless board. (A mini PCI from the outside of the board is included with some tablet PC tablet PC...
Page 26: Back: Labels
External Components Back: Labels Component Description Microsoft Certificate of Contains the Product Key number. Authenticity label (inside You may need this number to update or the battery bay) troubleshoot the operating system. System label Provides regulatory information about the tablet PC. Product identification label Contains the serial number of the tablet PC and a code describing the...
Page 27: Back: Tilt Feet And Pad Feet
External Components Back: Tilt Feet and Pad Feet Component Description Tilt feet (2) While the tablet PC is being used in portrait orientation as a free-standing tablet, can elevate the top of the tablet PC to provide a comfortable writing and viewing angle. Pad feet (2) Stabilize the tablet PC when the tablet PC is placed as a free-standing...
Page 28: Additional Tablet Pc Standard Components
External Components Additional Tablet PC Standard Components The components included with the tablet PC vary by geographical region and the tablet PC hardware ordered. The following illustrations and tables identify the standard external components included with most tablet PC models. These illustrations do not include supplementary documentation, supplementary CDs, the portfolio that shipped attached to the tablet PC or an optional keyboard, or optional devices such as...
Page 29: Documentation Cds
External Components Documentation CDs Among the CDs included are: ■ Documentation Library CD, which includes product-specific documentation for the tablet PC, along with modem, networking, safety, and regulatory information. For information about using the Documentation Library CD, refer to the printed Startup Guide included with the tablet PC. ■...
Page 30: Cords And Cables
External Components Cords and Cables Component Description Power cord* Connects the AC adapter to an AC electrical outlet. Modem cable Connects the modem to an RJ-11 telephone jack or to a country-specific modem adapter. ✎ The modem cable has a 6-pin RJ-11 telephone connector at each end.
Page 31: Adapters And Accessories
External Components Adapters and Accessories Component Description AC adapter* Converts AC power to DC power. Country-specific modem Adapts the modem cable to a adapter (included by region non-RJ-11 telephone jack. as required with modem models only) Japan-specific outlet adapter Connects the AC adapter to a 2-prong (Japan only) electrical outlet.
Page 32: Tablet Pc Keyboard Components
External Components Tablet PC Keyboard Components This section identifies the hardware components of an optional tablet PC keyboard. ■ For information about detaching, attaching, and adjusting the keyboard, see Chapter 8, “External Device Connections.” ■ For information about using the keyboard, see Chapter 2, “Pen, Command Controls and Keyboards.”...
Page 33: Front: Keys
External Components Front: Keys Component Description Function keys (11) Perform system and application tasks. For example, in Windows and many applications, pressing F1 opens a Help file. ■ To enter an F11 function, press F11/F12. ■ To enter an F12 function, press Fn+F11/F12.
Page 34: Front: Positioning And Security Features
External Components Front: Positioning and Security Features Component Description Rotation disk Rotates the tablet PC while it is attached to the keyboard. Docking alignment Help guide the tablet PC and keyboard notches (4) into an optional Docking Station. Keyboard latch When the tablet PC and keyboard are closed, locks the tablet PC to the keyboard:...
Page 35: Top
External Components Component Description Alignment key Inserts into the alignment key slot on the tablet PC to safeguard attachment procedures. For example, matching the alignment key to the alignment key slot on the tablet PC helps you correctly orient the tablet PC to the keyboard as you attach the tablet PC to the keyboard.
Page 36: Back
External Components Back Component Description Screen protector slots (2) Secure a screen protector* to the keyboard. Attachment release switch Releases attachments, such as the portfolio, a screen protector*, or the tablet PC, from the keyboard. Docking connector Allows the tablet PC to be connected pass-through to an optional Docking Station while the tablet PC is attached to the...
Page 37: Additional Keyboard Standard Component
External Components Additional Keyboard Standard Component Component Description Spare pointing stick caps (2) Replace a worn pointing stick cap. 1–28 Hardware Guide...
Page 38: Pen, Command Controls And Keyboards
Pen, Command Controls and Keyboards You can enter and access information on the tablet PC by voice (supported in English only), pen, command controls, the on-screen keyboard, or the tablet PC keyboard or external USB keyboard. An optional external mouse can be connected to a USB connector on the tablet PC, an optional Docking Station, or some external USB keyboards.
Page 39: Entering Information With The Pen
Pen, Command Controls and Keyboards Entering Information with the Pen Identifying the Pen Tip and Pen Button The pen interacts with the tablet PC whenever the tip of the pen 1 is within 1.27 cm (0.5 inch) from the screen. The pen button 2 emulates the functions of the right-click button on an external mouse.
Page 40: Performing Other Procedures With The Pen
Pen, Command Controls and Keyboards Performing Mouse Clicks with the Pen To select an item on the screen as you would with the left button of an external mouse: » Tap the item with the tip of the pen. To double-click an item on the screen as you would with the left button of an external mouse: »...
Page 41: Calibrating The Pen
Pen, Command Controls and Keyboards Calibrating the Pen The pen can function at the default calibration or at a calibration set by another user. However, HP highly recommends that you use the pen only while it is calibrated to your personal handwriting and mouse action motions.
Page 42: Setting Pen Preferences
Pen, Command Controls and Keyboards Using the Pen Holder To protect the pen when you are not using it, insert the pen, tip first, into the pen holder on the tablet PC. Inserting the pen into the pen holder Setting Pen Preferences Pen preferences are set in the Tablet and Pen Settings window of the operating system.
Page 43: Command Controls
Pen, Command Controls and Keyboards Command Controls The 9 command controls enable you to enter commands usually entered with keyboard keys while you are using the tablet PC without an external keyboard. The command controls can also be used while you are using the on-screen keyboard or an optional keyboard.
Page 44: Command Controls Quick Reference
Pen, Command Controls and Keyboards Command Controls Quick Reference The following table identifies the default setting and activation procedure for each command control. ■ To activate a pen-activated button, tap the button with the tip of the pen. ■ To activate a manually activated button, press and release the button.
Page 45: Using Command Controls
Pen, Command Controls and Keyboards Button Default Function Activation Windows In Windows, functions like the Manual Security ctrl+alt+delete command on a button* standard keyboard. In the Setup utility, functions like the reset button on some computers. Esc button* During startup, opens the Setup Manual utility.
Page 46 Pen, Command Controls and Keyboards For more information about using the Tablet PC Input Panel application, refer to the Help file within the application, the “On-Screen Keyboard” section, later in this chapter, or to an on-screen tutorial. To access the tutorials: 1.
Page 47 Pen, Command Controls and Keyboards Display Toggle Button Press the Display Toggle button to adjust the display settings for the tablet PC and the optional external monitor. When Windows is running, the Display Toggle button toggles the external monitor display settings in the following order: ■...
Page 48: Windows Security Button
Pen, Command Controls and Keyboards Tab Button Press the tab button manually to enter the tab command as you would by pressing the key on a standard keyboard. The tab button can be used with or without the on-screen keyboard or an optional keyboard.
Page 49 Pen, Command Controls and Keyboards If the system remains unresponsive after selecting Shut Down in the Windows Security window, slide and hold the power switch for 4 seconds. For additional shut down procedures, refer on this CD to the Software Guide, “Power” chapter. For information about using the ctrl+alt+delete command in non-Windows applications, refer to the application documentation.
Page 50 Pen, Command Controls and Keyboards The function of the esc command varies among applications. Esc is usually used to exit a mode or routine or to cancel a function. The esc button can be combined with keystrokes on the on-screen keyboard or an external keyboard. For example, press key on either keyboard, then the esc button, to display the ctrl Windows Start menu.
Page 51: Setting Command Control Preferences
Pen, Command Controls and Keyboards Setting Command Control Preferences All command controls except the Display Toggle button and the enter function of the jog dial can be customized to launch applications, simulate key combinations, or perform preset system functions. Each programmable command control can be assigned to 4 settings.
Page 52 Pen, Command Controls and Keyboards In the primary views (Portrait-Primary and Landscape-Primary), the image switches clockwise between vertical and horizontal. In the secondary views (Portrait-Secondary and Landscape- Secondary), the image switches counterclockwise between vertical and horizontal. ■ Left-handed users may find the secondary views more convenient.
Page 53: Returning All Command Controls To Default Settings
Pen, Command Controls and Keyboards Assigning or Changing a Preference To assign or change the function of a programmable command control: 1. Select Start > Control Panel > Printers and Other Hardware icon > Tablet and Pen Settings window > Tablet Buttons tab. 2.
Page 54: On-Screen Keyboard
Pen, Command Controls and Keyboards On-Screen Keyboard The Tablet PC Input Panel application displays a keyboard on the screen. This on-screen keyboard simulates the functions of an optional keyboard. To open the Tablet PC Input Panel application, tap the Tablet PC Input Panel launch button 1 with the pen.
Page 55: Tablet Pc Keyboard
Pen, Command Controls and Keyboards Tablet PC Keyboard An optional tablet PC keyboard that is thinner than the tablet PC but the same length and width is available from your HP authorized dealer, reseller, or service provider. When the tablet PC is attached to the keyboard, the tablet PC can be folded down flush with the keyboard for transport or tilted upward and used like a notebook display.
Page 56: Using The Pointing Device
Pen, Command Controls and Keyboards Using the Pointing Device Navigating and Selecting To move the pointer, press the pointing stick 1 in the direction you want to move the pointer. To increase or decrease pointer speed, increase or decrease the directional (not downward) pressure on the pointing stick.
Page 57: Using The Keypad
Pen, Command Controls and Keyboards Setting Pointing Device Preferences Pointer speed, click speed, mouse trails, and other pointing device preferences can be set in the Mouse Properties window of the operating system. To access Mouse Properties, select Start > Control Panel > Printers and Other Hardware icon > Mouse icon. To learn more about a setting, select the question mark icon in the upper right corner of the window, then select the setting.
Page 58 Pen, Command Controls and Keyboards Turning the Keypad On and Off 1 on the keyboard to turn the keypad on and off. Press Fn+num lk ■ 1 to turn the When the keypad is on, press Fn+num lk keypad off. The num lock light 2 turns off. ■...
Page 59 Pen, Command Controls and Keyboards Switching Keypad Keys Between Standard and Keypad Functions You can temporarily switch the functions of keypad keys between their standard keyboard functions and their keypad functions by 1 and using shift ■ To use a key on the keypad temporarily as a keypad key while the keypad is off, press and hold as you press the key.
Page 60: Using F11/F12
Pen, Command Controls and Keyboards Using F11/F12 provides both F11 and F12 functions. F11/F12 ■ To enter an F11 function, press F11/F12 ■ To enter an F12 function, press Fn+F11/F12 Identifying the F11/F12 and Fn keys Hardware Guide 2–23...
Page 61: Battery Packs
Battery Packs Running the Tablet PC on Battery Power When the tablet PC is connected to external power, the tablet PC runs on external power. When a charged battery pack is in the tablet PC and the tablet PC is not connected to external power, the tablet PC runs on battery power.
Page 62: Replacing A Battery Pack
Battery Packs Replacing a Battery Pack Removing a Battery Pack Ä CAUTION: To prevent loss of work when removing a battery pack that is running the tablet PC, initiate Hibernation or turn off the tablet PC before removing the battery pack. ■...
Page 63 Battery Packs 2. To unlock the battery pack release latch, slide the latch firmly toward the unlock icon 1. Then hold the latch as you disengage the 2 tabs on the battery pack from the 2 slots on the battery bay 2 and lift the battery pack out of the battery bay 3.
Page 64: Inserting A Battery Pack
Battery Packs Inserting a Battery Pack To insert a battery pack into the tablet PC: 1. Turn the tablet PC front side down. 2. Align the 2 rectangular tabs 1 on the battery pack with the 2 rectangular alignment slots 2 in the battery bay. Aligning the battery pack tabs with the battery bay alignment slots 3–4 Hardware Guide...
Page 65 Battery Packs 3. Angle the battery pack toward the alignment slots 1 until the 2 tabs are inserted into the 2 alignment slots 2. 4. Tilt the battery pack downward until it snaps into place 3. Inserting a battery pack 5.
Page 66: Securing A Battery Pack
Battery Packs Securing a Battery Pack Use the battery pack security screw to hold the battery pack in place, and to provide antitheft protection for the battery pack. Accessing the Battery Pack Security Screw A battery pack security screw ships inside the battery bay. To access the battery pack security screw: 1.
Page 67: Inserting A Battery Pack Security Screw
Battery Packs Inserting a Battery Pack Security Screw To secure the battery pack in the battery bay with a battery pack security screw: 1. Insert the battery pack into the battery bay as instructed in “Inserting a Battery Pack” earlier in this section. 2.
Page 68: Charging A Battery Pack
Battery Packs Charging a Battery Pack The battery pack in the tablet PC charges whenever the tablet PC is connected to external power. The battery pack charges whether or not the tablet PC is in use, but charges faster when the tablet PC is off. Charging may be delayed if a battery pack is new, has not been used for 2 weeks or more, or is much warmer or cooler than room temperature.
Page 69: Charging A New Battery Pack
Battery Packs Charging a New Battery Pack Fully charge the battery pack while the tablet PC is connected to external power through the AC adapter. A new battery pack that has been partially charged, but not fully charged, can run the tablet PC, but battery charge displays may be inaccurate.
Page 70: Monitoring The Charge In A Battery Pack
Battery Packs Monitoring the Charge in a Battery Pack Obtaining Accurate Charge Information To increase the accuracy of all battery charge displays: ■ Allow a battery pack to discharge to less than 10 percent of a full charge through normal use before charging it. ■...
Page 71 Battery Packs Interpreting Charge Displays Power Meter displays battery charge status in both percent and time: ■ The percent indicates the amount of charge remaining in the battery pack. ■ The time indicates the approximate running time remaining on the battery pack if the battery pack continues to provide power at the current level.
Page 72: Displaying Charge Information On A
Battery Packs Displaying Charge Information on a Battery Pack Charge information about a battery pack can be displayed on the battery pack with the Quick Check feature, which can be used whether or not the battery pack is inserted in the battery bay. To display the percent of a full charge remaining in a battery pack, press the battery quick check button 1 on the battery pack.
Page 73: Managing Low-Battery Conditions
Battery Packs Managing Low-Battery Conditions The information in this section describes default alerts and system responses. Some low-battery condition alerts and system responses can be changed in the Power Options Properties window of the operating system. Preferences set in the Power Options Properties window do not affect lights.
Page 74: Resolving Low-Battery Conditions
Battery Packs Resolving Low-Battery Conditions Ä CAUTION: If the tablet PC has reached a critical low-battery condition (one percent of a full charge) and has initiated Hibernation, do not slide the power switch until Hibernation is complete. Hibernation is complete when the power/standby light turns off.
Page 75: Initiating And Resuming From Standby Or Hibernation
Battery Packs When External Power Is Available To resolve a low-battery condition, select one of the following options: ■ Plug the AC adapter cable into the tablet PC, then plug the power cord into the AC adapter and into an AC electrical outlet.
Page 76: Calibrating A Battery Pack
Battery Packs Calibrating a Battery Pack When to Calibrate Calibrate an in-use battery pack whenever battery charge displays seem inaccurate or whenever the battery pack has not been used for one month or more. It should not be necessary to calibrate any battery pack, even if it is heavily used, more than once a month.
Page 77 Battery Packs 2. Connect the tablet PC to external power. (The battery light turns on.) To connect the tablet PC to external power, use any of the following methods: ❏ Plug the AC adapter cable into the tablet PC, then plug the power cord into the AC adapter and into an AC electrical outlet.
Page 78: Recharging The Battery Pack
Battery Packs To fully discharge a battery pack: 1. When the battery light turns off indicating that the battery pack is fully charged, select Start > Control Panel > Performance and Maintenance icon > Power Options icon > Power Schemes tab. 2.
Page 79: Battery Conservation Procedures And Settings
Battery Packs Battery Conservation Procedures and Settings Using the battery conservation procedures and settings described in the following sections extends the time that a battery pack can run the tablet PC from a single charge. Conserving Power as You Work To conserve power as you use the tablet PC: ■...
Page 80: Storing A Battery Pack
Battery Packs Storing a Battery Pack If the tablet PC will be unused and unplugged for more than one month, remove and store the battery pack. Ä CAUTION: To prevent damage to a battery pack, do not expose it to high temperatures for extended periods of time.
Page 81: Disposing Of A Used Battery Pack
Battery Packs Disposing of a Used Battery Pack Å WARNING: There is a risk of fire and chemical burn if a battery pack is handled improperly. Do not disassemble, crush, or puncture a battery pack or short the contacts on a battery pack. Do not expose a battery pack to temperatures higher than 60°...
Page 82: Drives
Drives Adding a Drive to the System Drives enable you to store and access data. A standard removable drive can be added to the system by inserting the drive into the MultiBay of an optional External MultiBay or Docking Station. A USB drive can be added by connecting the drive to a USB connector on the tablet PC or on the Docking Station.
Page 83: Understanding Drive Terms
Drives Understanding Drive Terms Terms for Types of Drives A hard drive is used for the permanent storage of data files and of software such as system files, applications, and drivers. The hard drive in the hard drive bay is the system hard drive, sometimes called the local disk.
Page 84: Caring For Drives
Drives Caring for Drives Drives are fragile system components that must be handled with care. Observe the following cautions when handling any drive. Ä CAUTION: To prevent damage to the tablet PC or a drive and loss of work: ■ Do not remove the system hard drive except for repair or replacement.
Page 85: Inserting Or Removing Drive Media
Drives Inserting or Removing Drive Media For general information about inserting or removing a drive from a MultiBay, refer to the documentation included with an optional External MultiBay or Docking Station. This section provides information that is not provided with optional drives or MultiBays and that may be helpful to users unfamiliar with standard removable drives.
Page 86: Removing A Cd Or Dvd (With Power)
Drives Removing a CD or DVD (with Power) If power is available: 1. Be sure the tablet PC is on. ✎ Press the media release button 1 on the drive bezel to release the media tray, then pull the tray outward until it is fully extended 2. 2.
Page 87: Removing A Cd Or Dvd (Without Power)
Drives Removing a CD or DVD (Without Power) Ä CAUTION: To prevent damage to the pen tip, do not insert the pen tip into the release access. If the tablet PC is turned off or if no power is available, the media release button on the drive will not work.
Page 88: Inserting A Diskette
Drives Inserting a Diskette To insert a diskette into a diskette drive, gently push the diskette, label side up, into the drive until it clicks into place. The media eject button extends when the diskette is correctly inserted. Identifying the media eject button on a diskette drive Removing a Diskette To remove a diskette from a diskette drive: 1.
Page 89: Using Drive Media
Drives Using Drive Media Avoiding Standby and Hibernation ✎ Initiating Standby or Hibernation while playing audio or video drive media may stop the play or diminish the quality of the play. If Standby or Hibernation is accidentally initiated while a medium is in use, slide and release the power switch to resume from Standby or Hibernation, then restart the tablet PC.
Page 90: Caring For Drive Media
Drives Displaying Media Contents Without Using AutoPlay To display the contents of a drive medium when the contents are not displayed by AutoPlay: 1. Insert the medium into the drive. 2. Select Start > Run, then type: explorer x: (where = the drive designation of the drive containing the medium).
Page 91: Finding More Drive Software Information
Drives Finding More Drive Software Information All the software you need to play the types of CDs and DVDs supported by the tablet PC is included with the tablet PC. For information about this software, refer on this CD to the Software Guide, “CD and DVD Software”...
Page 92: Audio
Audio Adjusting Volume Volume can be adjusted by using the Windows volume control icon, the Q Menu, or the volume adjustment available within some applications. Volume can be adjusted on the Q Menu without using a keyboard or the pen. For information about application volume features, refer to the application documentation.
Page 93: Using The Q Menu
Audio Using the Q Menu To adjust, mute, or restore volume using the Q Menu: 1. To open the Q Menu, press the Q menu button 1. ❏ To display the Windows volume control window, select the Volume tab. ❏ To mute or restore system volume, select the Mute On/Off tab.
Page 94: Using The Internal Speakers
Audio Using the Internal Speakers The internal speakers play sound in stereo from applications, the operating system, games, drive media, the Internet, and other sources. The internal speakers are disabled if: ■ Optional powered speakers or a headphone is connected to the audio-out jack on the tablet PC or an optional Docking Station.
Page 95: Using The Internal Microphone
Audio Using the Internal Microphone The internal microphone: ■ Has a standard sensitivity of -45 decibels. ■ Can be used while a screen protector or an optional tablet PC keyboard is attached. A screen protector is provided with an optional Docking Station. ■...
Page 96: Connecting An Audio Device
Audio Connecting an Audio Device Identifying Audio Jacks The tablet PC has 3 audio jacks: ■ The audio-out jack 1 connects stereo headphones or powered stereo speakers. ■ The headset jack 2 can support a headset, such as a mobile telephone headset with a microphone and a monaural ear piece.
Page 97: Using The Audio-Out Jack
Audio Using the Audio-Out Jack Å WARNING: To reduce the risk of personal injury, adjust the volume before putting on headphones. Ä CAUTION: To prevent possible damage to an external device, do not plug a monaural plug into the audio-out jack. When connecting a device to the audio-out jack: ■...
Page 98: Using The Microphone Jack
Audio Using the Microphone Jack The microphone jack supports a monaural microphone with a 3.5-mm plug. A monaural electret condenser microphone is recommended. If you connect a stereo microphone, left channel sound will record on both channels. When an optional headset or external microphone is connected to the tablet PC, the internal microphone is disabled.
Page 99: Internal Modem
Internal Modem The tablet PC has an RJ-11 telephone jack and preinstalled modem drivers. A modem cable with RJ-11 connectors at each end is included with models that ship with an internal modem. If you purchased the tablet PC in a country where RJ-11 telephone jacks are not standard, a country-specific modem adapter is also included.
Page 100: Connecting The Modem
Internal Modem Connecting the Modem Selecting Connectors The modem must be connected to an analog telephone line. Å WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a telephone cable into the RJ-45 network jack. Ä...
Page 101: Connecting The Modem To An Rj-11 Jack
Internal Modem Connecting the Modem to an RJ-11 Jack To connect the modem to an analog telephone line that has an RJ-11 telephone jack: 1. To access the RJ-11 jack 1 on the tablet PC, open the upper panel of the tablet PC. 2.
Page 102: Connecting The Modem With An Adapter
Internal Modem Connecting the Modem with an Adapter To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack: 1. To access the RJ-11 jack 1, open the upper panel of the tablet PC. 2.
Page 103: Setting Country Preferences
Internal Modem Setting Country Preferences The internal modem is configured to function in and meet the operating standards of the country in which you purchased the tablet PC. To use the internal modem in other countries, you must add country-specific modem configurations. Displaying the Current Country Configuration To display the current country configuration, select Start >...
Page 104: Solving Travel Connection Problems
Internal Modem 3. Select the New button, then type a name for the new location in the Location Name field. 4. Select a country or region for the new location from the Country/Region list. If you select a country or region that is not supported by the modem, the country configuration defaults to USA or UK.
Page 105 Internal Modem 3. Select your location, then select the Edit button. 4. Select the Tone or Pulse radio button. 5. Select the OK button > OK button. Check the Telephone Number Dial the telephone number on the telephone, verify that the remote modem is answering, then hang up.
Page 106: Accessing Communication Software
Internal Modem 6. In the Phone and Modem Options window, select the Modems tab. 7. Select your modem > Properties button > Modem tab. 8. Clear the Wait For Dial Tone Before Dialing check box. 9. Select the OK button > OK button. Accessing Communication Software To access preinstalled modem software, including software for terminal emulation and data transfer, select Start >...
Page 107: Network Connections
Network Connections The tablet PC has an RJ-45 network jack. Network tablet PC models also have an internal NIC (network interface card), preinstalled network drivers, and a network cable. The tablet PC can be connected to a network whether or not the internal modem is connected to a telephone line.
Page 108: Connecting The Network Cable
Network Connections Connecting the Network Cable A network cable has an 8-pin RJ-45 network connector at each end and may contain noise suppression circuitry, which prevents interference with TV and radio reception. 1. To access the tablet PC RJ-45 network jack 1, open the upper panel of the tablet PC.
Page 109: Turning A Network Connection Off And On
Network Connections Turning a Network Connection Off and On To conserve power, turn off a network connection you are not using. ■ To turn off a network connection, log off the network, then disconnect the network cable. ■ To turn on a network connection, connect the network cable, then log on to the network.
Page 110: Accessing The Network At Startup
Network Connections Accessing the Network at Startup To connect to a PXE (Preboot eXecution Environment) or RPL (Remote Program Load) server during startup, you must respond to the Network Service Boot prompt each time you want to connect to the server as the tablet PC starts or restarts. To set the tablet PC to display the Network Service Boot prompt each time it is started or restarted, you must enable the internal NIC for startup.
Page 111: Responding To A Network Service Boot Prompt
Network Connections Responding to a Network Service Boot Prompt After the internal NIC has been enabled for startup, the Network Service Boot prompt is displayed very briefly in the lower right corner of the screen each time the tablet PC is started or restarted. To connect to a network by responding to the prompt, use either of the following procedures: ■...
Page 112: External Device Connections
External Device Connections Standard Device The jacks and connectors described in this guide support standard external devices. ■ For information about which jack or connector to use, refer to the documentation included with the device. ■ For information about installing or loading any software required by the device, refer to the device documentation, the operating system Help files, or the device manufacturer’s Web site.
Page 113: Usb Device
External Device Connections USB Device USB is a hardware interface that can be used to connect external devices such as a USB keyboard, mouse, drive, printer, scanner, or hub to the tablet PC or an optional Docking Station. A USB device functions in the system in the same way as a comparable non-USB device.
Page 114: Tablet Pc Keyboard
External Device Connections Tablet PC Keyboard A tablet PC keyboard, which includes a numeric keypad, can be used with the tablet PC. For information about using the tablet PC keyboard pointing device, keypad, and key, see the “Pen, Command Controls F11/F12 and Keyboards”...
Page 115 External Device Connections 3. Position the tablet PC horizontally above the keyboard, with the front of the tablet PC facing the keyboard. Positioning the tablet PC above the keyboard 4. Align the 4 slots on the tablet PC with the keyboard connector, alignment key, and 2 keyboard hooks on the keyboard 1, then press the tablet PC downward until it snaps into place 2.
Page 116: Adjusting The Tablet Pc And Keyboard
External Device Connections Adjusting the Tablet PC and Keyboard To tilt the tablet PC screen to a comfortable viewing angle, push gently on the top of the tablet PC. Tilting the tablet PC on the keyboard Hardware Guide 8–5...
Page 117: Closing The Tablet Pc And Keyboard
External Device Connections Closing the Tablet PC and Keyboard To close the tablet PC and keyboard as you would close the display on a standard notebook: 1. Rotate the tablet PC clockwise until it snaps into place facing away from the keyboard. Rotating the tablet PC toward the back of the keyboard 2.
Page 118: Transporting The Tablet Pc And Keyboard
External Device Connections Transporting the Tablet PC and Keyboard If you are transporting the tablet PC and keyboard while they are not attached, be sure the rotation disk is in the default position. (The attachment features are at the rear of the tablet PC and the HP logo is right side up when you are facing the keyboard.) If you are transporting the tablet PC and keyboard while they are attached, you may want to use the keyboard latch.
Page 119: Detaching The Tablet Pc From The Keyboard
External Device Connections Detaching the Tablet PC from the Keyboard To detach the tablet PC from the keyboard: 1. If the tablet PC is closed, open the tablet PC, then rotate the tablet PC so the screen is facing the keyboard in the notebook position.
Page 120 External Device Connections 2. Rotate the tablet PC and keyboard so the back of the tablet PC and the keyboard are facing you. Positioning the tablet PC and keyboard to detach the tablet PC 3. To detach the keyboard, slide and hold the attachment release switch 1 on the tablet PC as you lift the tablet PC away from the keyboard 2.
Page 121: Cable Lock
External Device Connections Cable Lock Loop the cable around a secure object, then insert the cable lock key 1 into the security cable lock 2. Then insert the cable lock into the security cable slot 3 on the tablet PC. Connecting an optional cable lock ✎...
Page 122: Additional Hardware Options
Additional Hardware Options Obtaining Upgrades To order or learn more about optional hardware upgrades and accessories, visit the HP Web site at http://www.hp.com. hardware upgrade area is English only. Or, refer to the Worldwide Telephone Numbers booklet, included in English only with the tablet PC, to contact an HP-authorized dealer, reseller, or service provider.
Page 123: Selecting A Pc Card
Additional Hardware Options Selecting a PC Card A Type I or Type II PC Card can be used. A Type III PC Card will not fit into the PC Card slot of the tablet PC. (Types I, II, and III PC Cards vary by thickness, with Type III being the thickest.) Zoomed video cards are not supported.
Page 124: Inserting A Pc Card
Additional Hardware Options Inserting a PC Card Ä CAUTION: To prevent damage to the PC Card connectors, use minimal force when inserting a PC Card into the PC Card slot. 1. Hold the PC Card label-side up with the connector facing the tablet PC.
Page 125: Using An Sd Card
Additional Hardware Options 3. To release the PC Card, press the PC Card eject button 1. 4. Gently pull out the PC Card 2. Removing a PC Card Using an SD Card An SD Card is smaller than a PC Card, but can add similar functions to the tablet PC system.
Page 126: Configuring An Sd Card
Additional Hardware Options Configuring an SD Card If an SD Card manufacturer instructs you to install card-specific drivers, be sure to install only the drivers supported by the Windows XP Tablet PC Edition operating system. If you are unsure of driver compatibility, contact the SD Card manufacturer. Inserting an SD Card Ä...
Page 127: Stopping And Removing An Sd Card
Additional Hardware Options Stopping and Removing an SD Card Ä CAUTION: To prevent loss of work or an unresponsive system, stop an SD Card before removing it. ✎ An inserted SD Card uses power even when it is not in use. To conserve power, stop an SD Card when you are not using it.
Page 128: Increasing Memory
Additional Hardware Options Increasing Memory You can increase the amount of RAM (random access memory) in the tablet PC with an optional PC Card or with an optional memory module. The tablet PC has one user-accessible memory slot. The slot supports a PC133-compliant 128-megabyte, 256-megabyte, or 512-megabyte memory module.
Page 129: Removing Or Inserting A Memory Module
Additional Hardware Options Removing or Inserting a Memory Module Å WARNING: To prevent exposure to electric shock, work only in the memory and mini PCI compartment during this procedure. The hard drive bay and the memory and mini PCI compartment are the only user-accessible internal compartments on the tablet PC.
Page 130 Additional Hardware Options 6. Turn the tablet PC front side down. 7. Remove the two memory and mini PCI compartment retaining screws 1. 8. Slide, lift, then remove the memory and mini PCI compartment cover 2. Opening the memory compartment Hardware Guide 9–9...
Page 131 Additional Hardware Options 9. Remove or insert the memory module. To remove a memory module: a. Release the retention clips on each side of the memory module 1. (The memory module tilts upward.) b. Grasp the edges of the memory module, then gently pull it out of the memory slot 2.
Page 132 Additional Hardware Options To insert a memory module: a. Align the keyed (notched) edge of the memory module with the keyed area in the memory slot 1. b. Press the memory module into the slot from a 45-degree angle until it is seated 2. c.
Page 133 Additional Hardware Options 10. Align the tabs on the memory compartment cover with the cover slots on the tablet PC 1, then press downward on the cover until it is seated. 11. Reinsert the two retaining screws that secure the memory and mini PCI compartment cover to the tablet PC 2.
Page 134: Maintenance, Shipping And Travel
Maintenance, Shipping and Travel Maintaining Software HP recommends that you: ■ Install all software updates as they become available. For instructions, refer on this CD to the Software Guide, “Software Updates and Restorations” chapter. ■ Install and use virus protection software. Antivirus software can be purchased from most computer or electronics retailers.
Page 135: Protecting Hardware
Maintenance, Shipping and Travel Protecting Hardware To protect and prolong the performance of your hardware, observe the following cautions. Ä CAUTION: To prevent damage to your hardware or loss of work: ■ Carry and store the tablet PC in the portfolio or an optional Executive Portfolio.
Page 136: Using Portfolios
Maintenance, Shipping and Travel Using Portfolios To protect the tablet PC screen, HP recommends that you use or transport the tablet PC with a portfolio attached. A slim portfolio that protects the tablet PC or the tablet PC attached to an optional keyboard is included with the tablet PC.
Page 137 Maintenance, Shipping and Travel When you are using the tablet PC attached to the tablet PC keyboard, press the 2 tabs on the portfolio into the 2 universal attachment slots on the keyboard. Identifying the universal attachment slots on a tablet PC keyboard 10–4 Hardware Guide...
Page 138: Detaching A Portfolio
Maintenance, Shipping and Travel Detaching a Portfolio To release a portfolio from the tablet PC, slide an hold the attachment release switch on the tablet PC. Sliding the attachment release switch on the tablet PC To release a portfolio from the tablet PC keyboard, slide and hold the attachment release switch on the tablet PC keyboard.
Page 139: Cleaning Hardware
Maintenance, Shipping and Travel Cleaning Hardware Å WARNING: To prevent electric shock or damage to components, do not attempt to clean the tablet PC until you: ■ Shut down the tablet PC. ■ Disconnect the tablet PC from external power. ■...
Page 140: Cleaning A Tablet Pc Keyboard
Maintenance, Shipping and Travel Cleaning a Tablet PC Keyboard Dust, lint, and other debris can affect the performance of an optional tablet PC keyboard. To prevent sticking or nonfunctioning keys, clean the keyboard frequently using a can of compressed air with a straw extension. Blow the compressed air around the base of each key.
Page 141: Replacing Hardware
Maintenance, Shipping and Travel Replacing Hardware Replacing the System Hard Drive The system hard drive is the hard drive in the hard drive bay. Remove the system hard drive only for repair or replacement. Ä CAUTION: To prevent an unresponsive system and loss of work: ■...
Page 142 Maintenance, Shipping and Travel 1. Save your work, then shut down the tablet PC. 2. Turn the tablet PC front side down. 3. Remove the 2 hard drive bay cover retaining screws 1. 4. Slide, lift, then remove the hard drive bay cover 2. Removing the hard drive bay cover Ä...
Page 143 Maintenance, Shipping and Travel 5. To remove the hard drive, gently disengage the drive connectors 1 by sliding the hard drive toward the lower edge of the tablet PC. 6. Remove the drive from the bay 2. Removing a system hard drive from the hard drive bay 10–10 Hardware Guide...
Page 144 Maintenance, Shipping and Travel 7. To insert the replacement hard drive, lower the drive into the hard drive bay 1, then slide the connectors on the hard drive toward the connectors in the bay 2 until the connectors engage and the drive is seated. Inserting a system hard drive into the hard drive bay Hardware Guide 10–11...
Page 145 Maintenance, Shipping and Travel 8. Align the tabs on the hard drive bay cover with the cover slots on the tablet PC 1, then press downward on the cover until it is seated. 9. Reinsert the 2 retaining screws that secure the cover to the tablet PC 2.
Page 146: Replacing A Pointing Stick Cap
Maintenance, Shipping and Travel Replacing a Pointing Stick Cap Two pointing stick replacement caps are included with an optional tablet PC keyboard. To replace a worn pointing stick cap: 1. If the keyboard is attached to the tablet PC, shut down the tablet PC.
Page 147: Preparing The Tablet Pc For Shipping Or Travel
Maintenance, Shipping and Travel Preparing the Tablet PC for Shipping or Travel 1. Back up your work. 2. Remove a PC Card or SD Card. 3. Undock the tablet PC from an optional Docking Station. 4. Turn off, then disconnect all optional external devices such as headphones or an External MultiBay.
Page 148: Traveling With The Tablet Pc
Maintenance, Shipping and Travel Traveling with the Tablet PC Checklist for Travelers ■ Take along a backup of your work. Do not pack the backup with the tablet PC. ■ Carry the tablet PC with you. Do not check it with your luggage.
Page 149: Contacting Hp
Maintenance, Shipping and Travel ■ If you are traveling internationally: ❏ If you plan to use an internal modem, review Chapter 6, “Internal Modem” for information about using adapters and country configurations. You may want to print and take with you the “Solving Travel Connection Problems”...
Page 150 Maintenance, Shipping and Travel ■ Download the latest drivers, utilities, and other software updates for your tablet PC. ■ Subscribe to the HP Support Software CD. To access these links and descriptions of the options they provide, select Start > HP Help and Support. The HP Help and Support menu is displayed in the left panel.
Page 151: Specifications
Specifications The information in this chapter may be helpful if you plan to use or transport the tablet PC internationally or in extreme environments. Tablet PC and Tablet PC Keyboard Dimensions Dimension Metric U.S. Height 2.1 cm 0.8 in Width 21.0 cm 8.3 in Depth...
Page 152: Tablet Pc Operating Environment
Specifications Tablet PC Operating Environment Factor Metric U.S. Temperature Operating 10° to 35° C 50° to 95° F Nonoperating -10° to 60° C 14° to 140° F Relative humidity (noncondensing) Operating 10 to 90% 10 to 90% Nonoperating 5 to 90% 5 to 90% Maximum altitude (unpressurized) Operating...
Page 153: Modem Specifications
Specifications Modem Specifications This tablet PC has been tested and found to comply with the limits for a Class B digital device. Factor Specification Temperatures Operating 10° to 40° C (50° to 104° F) Nonoperating -20° to 60° C (-4° to 140° F) Relative Humidity (noncondensing) Operating 10 to 90%...
Page 154 Index analog telephone lines 6–6 antennas 1–7 1–10 AC adapter antivirus software 10–1 AC power connector 1–11 applications key 1–24 connecting 3–15 applications. See software disconnecting 3–1 AT commands 6–8 identifying 1–22 attachment release switch light 1–2 on tablet PC 1–14 8–9 AC power connector 1–11 on tablet PC keyboard 1–27...
Page 155 Index inserting battery pack into 3–4 button(s) Microsoft Certificate of battery quick check 3–12 Authenticity label, inside esc 1–6 2–12 1–17 Journal launch 1–3 2–9 release latch 1–15 media eject, on diskette drive removing a battery pack 4–7 security screw from 3–6 media release, on optical drive removing battery pack from 4–5...
Page 156 Index CD-ROM, CD-RW drives. See included with tablet PC 1–22 drives when required 6–2 CDs included with tablet PC 1–19 critical low-battery condition CDs, CD-RWs. See drive media identifying 3–13 circuitry, noise suppression restoring from 3–15 on modem cable 6–3 ctrl+alt+delete command 2–11 on network cable 7–2 command controls...
Page 157 Index Docking Station audio-out jack on 5–3 eject button docking alignment notches diskette drive 4–7 1–25 optical drive 4–5 docking alignment slots 1–8 PC Card 9–4 docking connector 1–14 electrostatic discharge (ESD) 9–8 drives supported by 4–1 enablers, PC Card 9–2 drive media enter command 2–13 affected by airport security 4–3...
Page 158 Index Fn, specific functions of Hibernation on on-screen keyboard 2–17 avoiding while playing media on tablet PC keyboard 2–21 4–8 2–23 identifying 10–8 freeze, system 2–11 initiated during critical function keys (F1, F2, etc.) low-battery condition 3–13 accessing F12 on tablet PC initiating 3–15 keyboard 2–23 resuming from 3–15...
Page 159 Index connector 1–26 detaching 8–7 8–8 jack F11/F12 key 2–23 audio-out 5–5 hooks 1–26 connection procedures 8–1 latch 8–7 headset 5–5 locking to tablet PC 8–7 microphone 5–5 numeric keypad 2–20 PBX 6–6 obtaining 2–18 RJ-11 telephone 6–2 opening 8–5 8–7 RJ-45 network 7–2 pointing device 2–19...
Page 160 Index Landscape View, Primary and module, inserting or removing Secondary 2–14 9–8 latch modules supported 9–7 battery pack release 1–15 3–3 slots available 9–7 docking restraint, recess 1–14 microphone, external keyboard 8–7 connecting 5–7 8–1 See also button(s); switch microphone jack 5–5 light(s) microphone, internal 5–4 AC adapter 1–2...
Page 161 Index displaying image on 8–1 Product Key 1–17 external monitor connector serial 1–17 1–11 numeric keypad 2–20 mouse, external setting preferences for 2–1 operating environment supported 2–1 specfications 11–2 USB connectors 8–2 operating system Product Key number 1–17 network optical disc. See drive media accessing at startup 7–4 optical drive.
Page 162 Index peripherals Power Meter 3–10 connecting, disconnecting 8–1 power/standby light 1–4 USB 8–2 Product Key number 1–17 See also connector(s); fasteners projector for tablet PC keyboard; jack; connecting 8–1 specific types of devices displaying image on 8–1 pointing device(s) external monitor connector command controls 2–6 1–11 on tablet PC keyboard 2–18...
Page 163 Index RJ-11 telephone jack serial number 1–17 connecting 6–2 servers, network 7–4 modem cable 1–21 Setup utility RJ-45 network jack accessing 7–4 connecting 7–2 network settings 7–4 network cable 1–21 resetting the tablet PC 2–12 rotate button shipping the tablet PC 10–14 identified 1–3 shutting down the tablet PC 2–11 procedures 2–9...
Page 164 Index Power Meter 3–10 system lockup 2–11 setting up 2–2 Setup utility 2–12 tab button Tablet PC Input Panel 2–17 identified 1–6 Task Manager 2–11 procedures 2–11 Windows Security window responding to Network Service 2–11 Boot prompt with 7–5 speakers, external Tablet PC Input Panel application audio-out jack 5–5 2–17...
Page 165 Index battery pack temperature considerations 3–20 vent 1–10 connecting the modem 6–2 virus protection software 10–1 6–5 volume controls modem approvals label 1–17 adjusting volume with 5–1 operating environment conserving power with 3–19 specifications 11–2 wireless certification label Windows applications key 1–24 1–17 Windows Security button troubleshooting...

This manual is also suitable for:

Compaq tc1100 Compaq tr1105

HP TC1000 - Tablet PC - Crusoe TM5800 1 GHz Hardware Manual

1 External Components

2 Pen, Command Controls and Keyboards

3 Battery Packs

4 Drives

5 Audio

6 Internal Modem

7 Network Connections

8 External Device Connections

9 Additional Hardware Options

10 Maintenance, Shipping and Travel

11 Specifications

Quick Links

Related Manuals for HP TC1000 - Tablet PC - Crusoe TM5800 1 GHz

Summary of Contents for HP TC1000 - Tablet PC - Crusoe TM5800 1 GHz

This manual is also suitable for:

Table of Contents