Summary of Contents for Fujitsu T2020 - LifeBook Tablet PC
Page 1
FPCPR87AP / FPCPR88AP / FPCPR89AP This user’s guide contains information on your port repli- cator with your Fujitsu LifeBook®. We strongly recommend that you read this guide before using the port replicator even if you are already familiar with such accessories.
Page 2
Power Optional Jack Optical USB Ports Drive Security LAN Connector Lock Slot Docking Connector External Monitor Headphone Jack Connector DVI-D Connector Figure 1. Port Replicator - Rear and Left Side Docking Connector Suspend/ Resume Button Latch Release with Security Lock Slot Air Vents Figure 2.
Page 3
REAR PANEL/LEFT SIDE COMPONENTS The following is a brief description of the port replicator’s rear and left side components. (Figure 1) DC Power Jack The DC power jack allows you to plug in the AC adapter or the optional Auto/Airline adapter to power your notebook. USB Ports There are four USB 2.0 ports on the port replicator.
Page 4
Optical Drive (on select models) On the left-hand side of the port replicator -- depending upon which model of port replicator you purchased -- there may be a fixed optical drive. If you have an optical drive installed, see the instructions contained in “Using the optional optical drive”...
Air Vents Air vents are used to cool the system to prevent overheating To protect your notebook and/or port replicator from damage and to optimize performance, be sure to keep all air all vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending upon the environment in which the system is used.
Page 6
Press points Docking connector Figure 3. Attaching the Port Replicator 2. Position the system so that the docking connector on the bottom of the system is aligned with the docking connector on the port replicator (Figure 3). 3. Push your notebook down at the two press points indi- cated in Figure 3 to connect it securely to the port repli- cator.
DETACHING THE PORT REPLICATOR The port replicator can be detached from your notebook while the power is on, while in suspend mode, or while the power is off. To detach the port replicator follow these steps: 1. Pull the port replicator latch release outwards (Figure 4). 2.
Page 8
USING THE OPTIONAL OPTICAL DRIVE Depending upon which model of port replicator you purchased, it may have a built-in optical drive. Emergency Tray Release Drive Tray Release Button Optical Drive Tray Figure 5. Optical Drive Location There is a variety of media available to use with your system, depending upon the port replicator configuration you have selected.
Page 9
Depending upon your notebook configuration, you may have one of the following fixed optical drives: • DVD/CD-RW combo: The combo drive allows you to access movie, software, data, or audio DVD/CDs, and to write data onto recordable CD-R and CD-RW discs. Dual-Layer Multi-Format DVD Writer: This drive allows •...
The tray will come out of the port replicator a short distance. 2. Gently pull the tray out until a media disc can easily be placed in the tray. You should periodically check the Fujitsu website at: http://www.us.fujitsu.com/computers for current updated drivers.
Page 11
• All LifeBook DVD players are set to play DVD titles with region code number 1 which is specified for the North American market. The region number is a regional restriction code defined by the DVD Forum acting on Holly- wood requirements.
Figure 6. Loading/Ejecting Media REMOVING MEDIA 1. Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray will come out of the LifeBook notebook a short distance. 2. Gently pull the tray out until the disc can easily be removed from the tray.
Page 13
EMERGENCY MEDIA TRAY RELEASE If for some reason the eject button fails, you can open the media tray with a paper clip inserted into the eject hole in the far right side of the front of the tray. Straighten one side of a paper clip and push it gently into the hole.
DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujitsu Computer Systems Corporation Address: 1250 E. Arques Avenue, M/S 122 Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that products: - Port Replicator FPCPR87AP - Port Replicator (w/Dual-Layer Multi-...
Page 16
For technical support call:1-800-8FUJITSU (1-800-838-5487) or e-mail us at: 8fujitsu@us.fujitsu.com Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Ltd. Roxio® is a trademark or registered trademark of Sonic Solutions. PowerDirector is a trademark of CyberLink Corporation. All other trademarks mentioned herein are the property of their respective owners.