Connecting Video And Audio Cables; Connecting A Tv Using A Component Video Cable And An Audio Cable; Connecting A Tv Using A Video Cable And An Audio Cable - Pioneer BDP-09FD - Elite Blu-Ray Disc Player Operating Instructions Manual

Connecting video and
02
audio cables
Note
• Make the settings in the Setup Navigator menu according to
the type of cable connected (page 21).
• To output video signals from this player, connect using one of
the following (not including when connected using an HDMI
cable): a component video cable, an S-Video cable or a video
cable.
Connecting a TV using a component
video cable and an audio cable
FRONT SUB WOOFER
R L
LAN(100) DIGITAL OUT
CONTROL
IN
OPTICAL COAXIAL
FRONT SU
L
R
LAN(100) DIGITAL OUT
OPTICAL COAXIAL
It is also possible to
connect to an AV
receiver or amplifier.
Connect the audio
signals using audio
cables (7.1 channels)
or a digital audio cable
(page 19).
Direction of
signal flow
Note
• When connected to the TV using a component video cable, video
signals are not output with a resolution of 1080/24p or 1080/60p.
• Depending on the output video resolution setting, the picture
18
may not be output (page 25).
En
Player's rear panel
AUDIO OUT ( 7.1 ch )
CENTER SURROUND SURROUND
R L R L
BACK
VIDEO OUT
S-VIDEO VIDEO
RS-232 C
COMPONENT VIDEO
HDMI OUT
MAIN(KURO LINK) SUB P R P B Y
VIDEO OUT
S-VIDEO
RS-232 C
COMPONENT VIDEO
P P
R B
Use the BNC-RCA
adapter (included)
to connect an RCA
pin type cable.
Component cable or
three video cables
(commercially
available)
To component
To audio input
video input
terminals
terminals
TV
Connecting a TV using a video
cable and an audio cable
Caution
• Connect the player's video output directly to your TV.
This player supports analog copy protection technology.
Therefore the picture may not be displayed properly if connected
to a TV via a DVD recorder/video deck or when playing the
player's output material that is recorded by a DVD recorder/
video deck. Furthermore, the picture may not be displayed
properly due to the copy protection when the player is connected
to a TV with a built-in video deck. For details, contact the
manufacturer of your TV.
FRONT
R L
CONTROL LAN(100) DIGITAL OUT
IN
OPTICAL
FRONT
L
R
VIDEO
LAN(100) DIGITAL OUT
OPTICAL COAXIAL
Y
Direction of
signal flow
Note
• Video signals are output with a resolution of 480/60i when
connected using a video cable or an S-Video cable.
Player's rear panel
AUDIO OUT ( 7.1 ch )
SUB WOOFER CENTER SURROUND SURROUND
R L R L
BACK
VIDEO OUT
S-VIDEO VIDEO
RS-232 C
COMPONENT VIDEO
HDMI OUT
COAXIAL
MAIN(KURO LINK) SUB P R P B Y
SU
S-VIDEO
RS-232 C
COMPONENT VIDEO
P
R
It is also possible to
connect to an AV
receiver or amplifier.
Connect the audio
signals using audio
cables (7.1 channels)
or a digital audio cable
(page 19).
To S-Video
To audio input input
terminal
terminal
TV
VIDEO OUT
VIDEO
P Y
B
To video
input
terminal