Komatsu PC400-8 Brochure

STANDARD EQUIPMENT
• Alternator, 50 Ampere, 24V • Engine, Komatsu SAA6D125E-5
• Anti-slip plates • Engine overheat prevention system
• Auto-decel • Fan guard structure
• Automatic engine warm-up system • Fuel pre-filter (with water separator)
• Batteries, 110 Ah/2 x 12V • Hydraulic track adjusters (each side)
• Boom holding valve • Multi-function color monitor
• Cab, capable OPG (OPG) with optional • Power maximizing system
bolt-on top guard • PPC hydraulic control system
• Corrosion resistor • Radiator & oil cooler dust proof net
• Counterweight, 9220kg 20,330lb • Rear reflector
• Dry type air cleaner, double element • Rear view mirror (RH, LH)
• Electric horn • Seat belt, retractable
OPTIONAL EQUIPMENT
• Air conditioner with defroster, • Cab accessories
hot & cool box —Rain visor
• Alternator, 60 ampere, 24 V —Sun visor
• Arms • Cab front guard
—2400 mm 7'10" arm assembly —Full height guard
—2900 mm 9'6" arm assembly —Half height guard
—3380 mm 11'1" arm assembly • Heater with defroster
—4000 mm 13'1" arm assembly • Long lubricating intervals for implement
—4800 mm 15'9" arm assembly bushings
• Batteries, 140 Ah/2 x 12 V • Rear view mirror (rear and sidewise)
• Bolt-on top guard, (Operator Protective • Rear view monitoring system
Guards level 2 (OPG)) • Seat, suspension
• Boom, 7060 mm 23'2" • Seat, suspension with heater
SPECIAL PURPOSE BUCKET
• Ripper bucket for hard and rock ground
—Capacity
SAE heaped 1.1 m 3 1.44 yd 3
CECE heaped 1.0 m 3 1.31 yd 3
Width 1250 mm 49.2"
• Single-shank ripper is recommended for
rock-digging and crushing, hard soil
digging, pavement removal works, etc.
www.Komatsu.com
CEN00223-01
• Track guiding guard, center section
• Track roller
—PC400-8, 7 each side
—PC400LC-8, 8 each side
• Track shoe
—PC400-8, 600 mm 24" triple grouser
—PC400LC-8, 700 mm 28" triple grouser
• Travel alarm
• Two settings for boom
• Working light, 2 (boom and RH)
• Working mode selection system
• Service valve
• Shoes, triple grouser shoes
—PC400-8
700 mm 28", 800 mm 31.5"
—PC400LC-8
600 mm 24", 800 mm 31.5"
• Track roller guards (full length)
• Track frame undercover
• Variable track gauge
• Working lights (2 on cab)
Printed in Japan 200804 IP.As(10)
Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
PC400
-8
PC400LC
-8
FLYWHEEL HORSEPOWER
Gross: 270 kW 362 HP @ 1900 rpm
Net: 257 kW 345 HP @ 1900 rpm
OPERATING WEIGHT
PC400-8: 41740– 42590 kg
92,020– 93,890 lb
PC400LC-8: 42290– 43200 kg
93,230– 95,240 lb
PC
400
Photo may include optional equipment.