Table of Contents
Advertisement
3. HARDWARE SETUP
16) Digital Audio Interface Connector (3-pin SPDIFOUT)
This connector is used to send audio signal outputs to amplifiers and speakers
and to digital recording devices like mini CD player/recorders.
P4T-M
P4T-M Digital Audio Interface
17) Wake-On-LAN Connector (3-pin WOL)
This connector supports a LAN card with a Wake-On-LAN output, such as the
ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the
system when a wakeup packet or signal is received through the LAN card.
IMPORTANT:
This feature requires that Wake On LAN or PCI Modem is
enabled (see BIOS 4.5.1 Power Up Control) and that your system has an ATX
power supply with at least 720mA +5V standby power.
P4T-M
P4T-M Wake-On-LAN Connector
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power
+5 Volt Standby
ASUS P4T-M User's Manual
1
+5V
SPDIFOUT
Ground
SPDIFOUT
WOL_CON
PME
Ground
33
Advertisement
Table of Contents
