Dell PowerConnect 3248 Manual page 15

CLI Commands
The following table summarizes the equivalent CLI commands for items in
the Switch/Security/Authentication Settings page.
Command
authentication login {radius |
local | tacacs} [tacacs | radius |
local] [local | tacacs | radius]
radius-server host host_ip_address
radius-server port port_number
radius-server key key_string
radius-server retransmit
number_of_retries
radius-server timeout
number_of_seconds
show radius-server
tacacs-server host host_ip_address
tacacs-server port port_number
tacacs-server key key_string
show tacacs-server
E x a m p l e
Console(config)#authentication login local radius
tacacs
Console(config)#radius-server host 192.168.1.25
Console(config)#radius-server port 181
Console(config)#radius-server key green
Console(config)#radius-server retransmit 5
Usage
Defines the login authentication method
and precedence.
Specifies the RADIUS server IP address.
Sets the RADIUS server UDP port number.
Sets the RADIUS encryption key (up to
20 characters).
Sets the number of times the switch
attempts to authenticate logon access
through the RADIUS server. (The range
is 1–30.)
Sets the number of seconds the switch waits
for a reply before resending a request. (The
range is 1-65535.)
Displays the current configuration of the
RADIUS server parameters.
Specifies the TACACS+ server IP address.
Sets the TACACS+ server TCP port
number.
Sets the TACACS+ encryption key (up to
20 characters).
Displays the current configuration of the
TACACS+ server parameters.
Addendum to the 3 248 and 52 24 User 's Guides
NOTE: The default
password for the enable
command is super. The
manager must change the
password.
15