Table of Contents
Advertisement
Management
CLI
Title
Show running config command displays
empty configuration
Using arrow keys for CLI command
history.
Authentication methods not accepted
Serial
Title
XModem support
Web-based Management
Title
Supported management browser and
platforms
Asset-tag setting
Telnet
Title
Password recovery
Configuration
Configuration files
Title
Configuration corruption between stacked
and stand-alone configurations
Security
Port Security
Title
Locked port discarding does not function
when swapping locked ports
Access Control List (ACL)
System Firmware Version 1.1.0.42
PowerConnect 3324/3348 Release Notes
Description
In the case where the default configuration has not been changed, the command
show running config results with an empty configuration.
CLI command recall (up/down arrow) may not list all commands
Not all authentication methods are accepted.
AAA authentication enable does not accept the local switch.
AAA authentication login does not keep the local switch.
Description
PowerConnect 3324/3348 supports Microsoft Windows HyperTerminal XModem.
Using other XModem software utilities is not recommended and does not guaranty
proper device functionality. For example the following error may occur:
console# copy xmodem://grm_11_02.ros image
Please download program using XMODEM.
XMODEM session has been aborted
console#
Description
PowerConnect 3324/3348 web-based management can be operated only by
Microsoft Internet Explorer Version 5.5 and above operating in Microsoft Windows
2000/XP and Netscape version 7.01 operating in Linux Red-Hat 6.0.
Asset-tag value setting is not possible from the embedded web management; it can
only be set from the CLI.
Description
Due to security reasons, password recovery is not available from a Telnet
connection, it is possible to recover password using the serial connection (see
"Password Recovery" in the PowerConnect 3324/3348 User Guide).
Description
When switching working mode from stacked mode to standalone and vice versa the
configuration file may be corrupted.
Description
The discard function is not properly checking the secure MAC listing. This is not
verified against the port number the MAC has been assigned to.
Page 7
Advertisement
Table of Contents
