SPA and Wireless IP Phone Field Reference
Provisioning Tab
Provisioning Tab
Regional Tab
Cisco SPA and Wireless IP Phone Administration Guide
Linksys Key System Parameters
Parameter
Linksys Key System
Multicast Address
Force LAN Codec
For information about the Provisioning page, see the
Guide
.
This section describes the fields for the following headings on the Regional tab:
•
Call Progress Tones, page 217
•
Distinctive Ring Patterns, page 219
•
Control Timer Values (sec), page 220
•
Vertical Service Activation Codes, page 221
•
Vertical Service Activation Codes, page 221
•
Outbound Call Codec Selection Codes, page 227
•
Time (SPA525G Only), page 230
Description
Enable or disable the Linksys Key System on the IP
phone.
Defaults to yes.
The multicast address is used by the SPA9000 to
communicate with the SPA IP phones.
Defaults to 224. 1 68. 1 68. 1 68:6061.
The choices are: none, G.711u, or G.711a. Defaults to
none.
Cisco SPA Provisioning
B
216