Network Configurations Using the Client Adapter
Buttons on the Client Utility Screens
The buttons on the client utility screens are used to perform specific functions.
most common buttons.
Table 1-1
Button
Cancel
OK
Start
Stop
X
? (available on HPC and
Windows CE .NET devices
only)
Network Configurations Using the Client Adapter
The client adapter can be used in a variety of network configurations. In some configurations, access
points provide connections to your network or act as repeaters to increase wireless communication
range. The maximum communication range is based on how you configure your wireless network.
This section describes and illustrates the two most common network configurations:
•
•
For examples of more complex network configurations involving client adapters and access points, refer
to the hardware installation guide for your access point.
Refer to
Note
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
1-6
Buttons on the Client Utility Screens
Ad hoc wireless local area network (LAN)
Wireless infrastructure with workstations accessing a wired LAN
Chapter 5
for information on setting the client adapter's network (or infrastructure) mode.
Description
Exits the screen without saving any changes
Saves any changes and exits the screen
Initiates a test
Stops a test that is running
Exits the screen without saving any changes
Provides information on the screen and its parameters
Chapter 1
Product Overview
Table 1-1
describes the
OL-1375-04