Installing a Catalyst 6506 or Catalyst 6506-E Switch Chassis
Figure 3-7
1
1
Installing the 3 RU Rack-Mount Shelf Kit
The 3 RU rack-mount shelf kit is included as part of the accessory kit for both the Catalyst 6506 and the
Catalyst 6506-E switch chassis. You need to install this kit first before you install the chassis in the rack.
The shelf kit supports the weight of the chassis while you install and secure the chassis in the rack.
The procedure for installing the shelf kit is located at
section on page
Catalyst 6500 Series Switches Installation Guide
3-18
L Brackets on the Catalyst 6506 and the Catalyst 6506-E Switch Chassis
2
1
2
3
4
5
6
o
M4 Phillips-head countersunk screws (10x)
3-47.
INPUT
FAN
OUTPU T
OK
OK
FAIL
2
Rack-mount L bracket (2x)
"Installing the 3 RU Rack-Mount Shelf Kit"
Chapter 3
Installing the Switch
OL-5781-08