Specifying a Primary DNS Server
OL-6037-01
Configuring the Domain Name Service
This chapter provides information to configure the Domain Name Service (DNS),
the facility that translates host names such as myhost.mydomain.com to IP
addresses such as 192.168.11.1. This chapter contains the following major
sections:
•
Specifying a Primary DNS Server
Using DNS Resolve
•
Specifying a Secondary DNS Server
•
Specifying a DNS Suffix
•
Specifying UDP Traffic on the DNS Server Port
•
Use the show running-config global command to display DNS configurations
(refer to the Cisco Content Services Switch Administration Guide).
To specify the primary DNS server, use the dns primary command. Enter the IP
address in dotted-decimal notation (for example, 192.168.11.1) of the DNS server
you want to specify as the primary DNS server.
For example:
(config)# dns primary 192.168.11.1
To remove the primary DNS server, enter:
(config)# no dns primary
C H A P T E R
Cisco Content Services Switch Getting Started Guide
3
3-1