4 mm*/0.2
inch*
0-50 mm/0.0-
2.0 inch
5 Press the
Margin Middle
To specify the middle margin of the copy.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document
on the ADF" on page 296.
2 Press the
3 Press the
press the
4 Press the
keypad, and then press the
NOTE:
Values marked by an asterisk (
0 mm*/
0.0 inch*
0-50 mm/
0.0-2.0 inch
5 Press the
Specify the value in increments of 1 mm/0.1 inch.
(Start) button to begin copying.
(Copy) button.
button until Margin Middle is highlighted, and then
button.
or
button or enter the desired value using the numeric
Specify the value in increments of 1 mm/0.1 inch.
(Start) button to begin copying.
button.
*
) are the factory default menu settings.
249
Copying