Input Mode Read Command; Lamp Time Read Command; Setting Read Command - Canon LV S3 - SVGA LCD Projector Specification

8.4 Input Mode Read Command

Command "CR1" [CR]
Detail Get selected Input No.
Acceptable
Response
%1
Unacceptable

8.5 Lamp Time Read Command

Command "CR3" [CR]
Detail Get total lamp running hours.
Acceptable
Response
%1
Unacceptable

8.6 Setting Read Command

Command "CR4" [CR]
Detail Get setting status for screen such as Ceiling/Rear.
Acceptable
Response
%1
Unacceptable
"%1" [CR]
"1" = Computer is selected
"3" = Video is selected
"?" [CR]
"%1" [CR]
Show as 4 digits
Ex.: "0410"[CR] 410 hours
"?" [CR]
"%1" [CR]
"11" [CR] = Normal Screen Setting
"10" [CR] = Rotation around the horizontal setting (Rear••
Ceiling ON)
"01" [CR] = Rotation around the horizontal setting Rear ON)
"00" [CR] = Vertical and right-and left (four directions)
reversal setting (status: Ceiling ON
"?" [CR]
)
Page 20/21