Software Requirements; Installing - Epson BrightLink 475Wi Operation Manual

Installing the Software

Software Requirements

EasyMP Network Projection runs on computers that meet the following
requirements.
OS Windows series (32-bit versions only)
• Windows 2000 (Service Pack 4)
• Windows XP
• Windows XP (Service Pack 1 or later)
• Windows Vista
• Windows Vista (Service Pack 1 or later)
• Windows 7
Mac OS X series
• Mac OS X 10.3.x
• Mac OS X 10.4.x
• Mac OS X 10.5.1 or later
• Mac OS X 10.6.x
Recommended: Mac OS X
10.3.9/10.4.11/10.5.5
CPU Mobile Pentium III 1.2GHz or faster
Power PC G3 900MHz or faster
Recommended: Pentium M 1.6GHz or faster
CoreDuo 1.5GHz or faster
Amount of Memory 256MB or more
Recommended: 512MB or more
Hard Disk Free 20MB or more
Space

Installing

*
q
Display Resolution of no less than XGA (1024x768)
and no higher than UXGA (1600x1200)
Display color of 16-bit color or greater
(approx. 32,000 display colors)
* Operation is not guaranteed in Mac OS X 10.5.0 because the Firewall settings
are not set correctly when the version is updated.
Make sure you check the following points before starting installation.
• When using a computer running any of the following operating
systems, you must have administrator authority to install EasyMP
Network Projection.
• Windows 2000 • Windows XP
• Windows Vista • Windows 7
• Make sure that you close all running applications before starting
installation.
• When the language selected for the installation varies from that of the
OS being used, the screens may not be displayed correctly.
For EMP NS Connection users
The EMP NS Connection name has changed.
Before change: EMP NS Connection
After change: EasyMP Network Projection
When using the same function as EMP NS Connection on the projector,
install EasyMP Network Projection after uninstalling EMP NS Connection.
You cannot connect to the projector correctly using EMP NS Connection.
7