Epson BrightLink 475Wi Connection Manual page 2

If you connect VGA cables to both the
label the cables. The teacher or other user needs to know which port is being used so that the
correct source for full interactivity can be selected in the Easy Interactive Function menu
screen.
For full computer interactivity and dual pen support (using Easy Interactive Tools or other
dual-pen application), you also need to connect a USB cable from the computer to the
projector.
Selecting the Source for Interactivity
Selecting the source for Computer Interactive enables Easy Interactive Tools to be used on the
"main computer" connected to the projector.
Computers or other devices connected to other sources (and not selected) can use the built-in
(embedded) interactive toolbar.
1. Press the button, select the
Menu
2. Select the
Easy Interactive Function setting
3. Select
Use Source
4. Select the source where the computer is connected. For example, if you connected the
computer to the projector's
computer to the projector's
A computer connected to the selected source (and also connected to the projector with a
USB cable) will work with Easy Interactive Tools and have dual-pen support.
2
Computer1
Extended
and press .
Enter
port, select
Computer1
port, select
HDMI
and ports, make sure you
Computer2
menu, and press .
Enter
and press Enter.
. If you connected the
Computer 1
.
HDMI