Getting Started Guide HP Integrity rx2600 server and HP workstation zx6000 Document Part Number: A9664-90020 June 2003...
Page 2
Getting Started Guide HP Integrity rx2600 server and HP workstation zx6000 Second Edition (June 2003) Document Part Number: A9664-90020 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Returned batteries are accepted free of charge. Å WARNING: Avoiding Burn Injuries. Some parts inside the computer will be hot. Wait approximately three to five minutes for them to cool down before touching them. HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 4
“Working In Comfort” section of this manual, before using your system. You can access more extensive ergonomics information at: ZZZKSFRPHUJR. HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
3 PCI Hi Capacity/ Optional Optional rack-mount 1 AGP High Integrity rx2600 server 4 PCI Hi Capacity/ tower High Integrity rx2600 server 4 PCI Hi Capacity/ rack-mount High HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–1...
Setting Up and Using Your System front panel 1–2 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 9
2 Locator LED and Button 6 Power Button (rack-mounted system only) 3 Diagnostic LEDs 1-4 7 Power LED (active only on zx6000 workstations with no MP card installed) 4 LAN LED HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–3...
Setting Up and Using Your System rear panel 1–4 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 11
4 System lock 11 10/100 LAN 5 Serial port A (console) 12 LAN LEDs 6 Serial port B 13 10/100/1000 LAN 7 Monitor connector(s) 14 LVD/SE SCSI (zx6000 workstation only) HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–5...
Å WARNING: If you have any doubt that you can lift the system or monitor safely, do not try to move them without help. 1–6 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 13
Since metallic contamination can cause permanent or intermittent failures on your electronic equipment, Hewlett-Packard strongly recommends that your site be evaluated for metallic particulate contamination before installation of electronic equipment. HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–7...
This equipment can be disconnected from the power by removing the power cord from the power outlet. The equipment must be located close to an easily accessible power outlet. 1–8 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 15
Ä CAUTION: To prevent possible damage to your monitor, make sure you select a monitor that supports the resolutions and frequencies you wish to use. www.ati.com www.NVIDIA.com HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–9...
Setting Up and Using Your System starting and stopping your system starting your system (QWHU 1–10 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Setting Up and Using Your System initializing your software Ä CAUTION: Do NOT switch OFF the system while the software is being initialized — this could cause unexpected results. turning off your system HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–11...
Setting Up and Using Your System installing hardware components Å WARNING: For most hardware installation procedures, you must power off the system and unplug the power cord from the outlet. 1–12 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Setting Up and Using Your System firmware and drivers http://www.hp.com/go/bizsupport download drivers/software rx2600 zx6000 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–13...
Setting Up and Using Your System configuring your system extensible firmware interface EFI Shell [Built-in] Boot Option Maintenance Menu System Configuration Menu Security/Password Menu 1–14 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Boot option maintenance menu Security/Password Menu Use up and down arrows to change option(s). Use Enter to select an option. Set Auto Boot TimeOut Boot Options Maintenance Menu Enter HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–15...
Page 22
Setting Up and Using Your System Boot Options Maintenance Menu 1–16 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Setting Up and Using Your System using the EFI shell (), 6KHOO (QWHU Device mapping table fs0: Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD(Part1,Sig00112233) blk0: Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master) blk1: Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0) startup.nsh HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–17...
Page 24
Setting Up and Using Your System Shell:\> cls (QWHU fs0:\> info mem Shell> fs0: fs0:\> _ .efi fs0:> ls 1–18 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 25
Setting Up and Using Your System help help fs0:\> help date boot configuration device memory shell scripts HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–19...
6DYH 6HWWLQJV WR 195$0 Boot Option Maintenance Menu Boot from a File Add a Boot Option Delete Boot Option(s) Change Boot Order Manage BootNext Setting Set Auto Boot TimeOut 1–20 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 27
Setting Up and Using Your System Select Active Console Output Devices Acpi (HWP0002, 700)/Pci(2|0). Acpi (HWP0003, 0)/Pci(0|0). Select Active Console Input Devices Select Active Standard Error Devices Cold Reset Exit HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–21...
Setting Up and Using Your System using the system configuration menu System Configuration Menu Security/Password Menu Advanced System Information Menu Set System Date Set System Time Reset Configuration to Default Help Exit 1–22 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Setting Up and Using Your System security/password menu Security/Password Menu Set Administrator Options Set User Options Set Administrator Password Set User Password Enable/disable Password Help Exit HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–23...
Page 30
Setting Up and Using Your System advanced system configuration menu Advanced System Configuration Menu using the security/password menu Security/Password Menu System Configuration Menu 1–24 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
This is available from local and modem ports for non-mirrored MP connection (CSP), or OS login (SE). session Additional features Additional features include: power control, system reset, and Transfer of Control (TOC). HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 1–25...
Count the number of beeps after the buzzer (see “Troubleshooting with the e-buzzer” on page 2-10). Contact HP Support (see page 2-19). If you still have a problem, see “Software Diagnostics Tools” on page 2-13. 2–2 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Download and install the latest firmware. • For workstations: go to the “Software and Drivers” section of the HP support site: www.hp.com/go/bizsupport For servers: go to • www.hp.com/support/itaniumservers HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 2–3...
Replace the mouse with unit that is known to work or try the mouse with another system. If the system starts but you still have a problem, see “Software Diagnostics Tools” on page 2-13. 2–4 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 37
Boot Options Maintenance Menu. For instructions, see page 1-20. If the system starts and you still have a problem, see “Software Diagnostics Tools” on page 2-13. you forgot the EFI password(s) HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 2–5...
System LED State On (green) Solid green Running On (green) Blinking green Booting On (green) Blinking orange (1/sec.) Attention On (green) Blinking red (2/sec.) Fault locator LED and button 2–6 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Rack-mounted: 2nd from bottom Green Port linked at 10 Mbps 4. Activity Tower: Left No LAN activity Rack-mounted: Bottom Green Flashing or solid green LED indicates activity on LAN port 2–8 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 41
100BT link established Rack-mounted: 2nd from bottom Blinking Green 100BT activity No link or 10BT link 4. Standby Tower: Left Green Standby Power on Power Rack-mounted: Bottom Standby Power off HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 2–9...
Troubleshooting troubleshooting with the e-buzzer 2–10 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 43
CPU connection problem, CPU failure, CPU power failure. See the hp rx2600/zx6000 Operation and Maintenance Guide for additional details and recommendations. System Board Defective system board. Contact support. HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 2–11...
Troubleshooting software diagnostics tools hp e-diagtools hardware diagnostics HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 2–13...
Directory of: fs1:\EFI 11/07/02 04:41p <DIR> 1,024 . 11/07/02 04:41p <DIR> 0 .. 11/07/02 04:41p <DIR> 1,024 HP 11/07/02 04:45p <DIR> 1,024 BOOT 0 File(s) 0 bytes 4 Dir(s) 2–14 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 47
01:54p 2,995 LaunchMenu.ini 11/07/02 01:54p 3,977 View_Doc.ini 5 File(s) 1,472,007 bytes 2 Dir(s) LaunchMenu fs0:\BOOT> launchmenu View Release Notes and Documentation Menu View e-DiagTools Info e-DiagTools for IPF HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 2–15...
1. Power off and restart your system. 2. Update the system's firmware. 3. Back up your data and contact your HP Support Agent for more advice. 1-Help 2-Advanced 3-Exit 4-Support Ticket 2–16 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 49
Troubleshooting ------------------------------------------ HEWLETT-PACKARD e-Diagtools Support Ticket ------------------------------------------ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Your system: HP - zx6000 Diagnostic: System Test Passed Date/Time: 05/01/2003 14:37:41 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 2–17...
Ä CAUTION: Using the Recovery CD permanently erases the current contents of your hard disk. Backup all data and personal files before using the Recovery CD. 2–18 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Troubleshooting where to get help www.hp.com/go/bizsupport information to collect before you contact support zx6000 rx2600 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide 2–19...
Troubleshooting online support www.hp.com/go/bizsupport zx6000 rx2600 phone support www.hp.com/country/us/eng/contact_us.html 2–20 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Regulatory Information This appendix includes: Declaration of conformity International regulatory statements HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide A–1...
For Compliance Information ONLY, contact: European contact: Hewlett-Packard, HQ-TRE, Herrenberger Straße 140, D-71034 Böblingen (FAX: +49-7031-14-3143) Americas contact: Hewlett-Packard, WGBU Quality Manager, 3404 E. Harmony Rd., Ft. Collins, CO 80528, U.S.A.(FAX: (970) 898-4556) A–2 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
For your safety, never remove the system’s cover without first removing the power cord and any connection to a telecommunication network. Always replace the cover before switching on again. HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide A–3...
Lithium-Batterie, die keine Schwermetalle enthält. Batterien und Akkumulatoren gehören nicht in den Hausmüll. Sie verden vom Hersteller, Händler oder deren Beauftragten kostenlos zurückgenommen, um sie einer Verwertung bzw. Entsorgung zuzuführen. A–4 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Lärmangabe nach Maschinenlärmverordnung - 3 GSGV (Deutschland) LpA < 70 db am Arbeitsplatz normaler Betrieb nach EN27779: 11.92. notice for japan (class a) notice for korea notice for taiwan HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide A–5...
Page 60
Regulatory Information A–6 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
This warranty covers the following HP Product(s): HP workstation zx6000 - 1 year, next day on-site HP integrity Integrity rx2600 server - 1 year, next day on-site This limited warranty includes: phone-in hardware support, parts, labor and, when needed, next-day on-site response for the duration of the warranty period.
WARRANTY IS EXCLUSIVE AND NO OTHER WARRANTY OR CONDITION, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED WITH RESPECT TO THIS PRODUCT. HP SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTIBILITY, SATISFACTORY B–2 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
HP's liability for property damage exceed the greater of $50,000 or the purchase price of the specific product that caused such damage. HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide B–3...
HP or the servicing dealer may require that the product be maintained by customer personnel under direct HP or dealer supervision. B–4 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Service contracts which provide after-hour or weekend coverage, faster response time, or service in an Excluded Travel Area are often available from HP, an authorized dealer, or authorized distributor at additional charge. HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide B–5...
HP Customer Support Center at 1-800-593-6631 for Itanium workstations and servers. contacting hp for warranty service Worldwide refer to: www.hp.com/cpso-support/guide/psd/cscus.html In the United States and Canada, support can be obtained at 1-800-593-6631. HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide B–7...
Page 68
Warranty Statements B–8 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 69
1–6 1–12 Firmware 1–24 configuration 1–1 1–26 firmware version 1.x 1–14 Configuration commands 1–19 firmware version 2.0 1–14 connectors 1–4 1–8 front panel 1–1 1–2 1–3 Console 1–21 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide Index–1...
Page 70
1–5 2–1 2–4 Set System Date 1–22 MP 1–4 1–5 1–25 2–9 Set System Time 1–22 MP LAN 1–4 2–9 Shell commands 1–19 MP VGA port 1–21 Index–2 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...
Page 71
System Configuration Menu 1–14 1–22 System LED 1–2 1–3 2–6 System Management 10/100 LAN 1–4 2–9 VGA 1–5 1–21 telnet 1–25 warranty 2–1 Terminal emulation 1–16 Windows 1–11 2–18 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide Index–3...
Page 72
Index Index–4 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide...