Panasonic WJ-GXD400 Installation Manual
Installation guide
Hide thumbs
Also See for WJ-GXD400:
- Setup instructions (54 pages) ,
- Specifications (2 pages) ,
- Product catalog (125 pages)
Table of Contents
Related Manuals for Panasonic WJ-GXD400
Summary of Contents for Panasonic WJ-GXD400
-
Page 1: Installation Guide
Installation Guide Network Video Decoder WJ-GXD400 Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in this manual. - Page 2 We declare under our sole responsibility that the product to which this Wij verklaren als enige aansprakelijke, dat het product waarop deze declaration relates is in conformity with the standards or other normative verklaring betrekking heeft, voldoet aan de volgende normen of andere documents following the provisions of Directives 2006/95/EC and normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 2004/108/EC.
- Page 3 For U.S.A The serial number of this product may be found on the sur- NOTE: This equipment has been tested and found to com- face of the unit. ply with the limits for a Class A digital device, pursuant to You should note the serial number of this unit in the space Part 15 of the FCC Rules.
-
Page 4: Important Safety Instructions
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Page 5: Limitation Of Liability
Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WAR- THIS PUBLICATION COULD INCLUDE TECHNICAL INAC- RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, CURACIES OR TYPOGRAPHICAL ERRORS. CHANGES INCLUDING BUT NOT LIMITED TO, THE IMPLIED WAR- ARE ADDED TO THE INFORMATION HEREIN, AT ANY RANTIES OF MERCHANTABILITY, FITNESS FOR ANY PAR- TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION TICULAR PURPOSE, OR NON-INFRINGEMENT OF THE... -
Page 6: Preface
Preface The network video decoder WJ-GXD400 is designed to convert digital image data (JPEG/MPEG-4) to analog video signals. By connecting to a network (LAN), images and audio from cameras and encoders connected to the network can be displayed on an HDMI monitor or on an analog monitor (NTSC/PAL). -
Page 7: About These Operating Instructions
About The Operating Instructions There are 2 sets of operating instructions for the WJ-GXD400 as follows. • Installation Guide (this book) • Setup Instructions (PDF) The "Installation Guide" contains descriptions of how to install and connect this unit. ® Refer to the "Setup Instructions (PDF)" on the provided CD-ROM for descriptions of how to perform the unit settings. Adobe ®... -
Page 8: Trademarks And Registered Trademarks
Trademarks and Registered Trademarks • Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. -
Page 9: Table Of Contents
CONTENTS Important Safety Instructions ........................4 Limitation of Liability ............................ 5 Disclaimer of Warranty ..........................5 Preface ................................ 6 Features ..............................6 About These Operating Instructions ......................7 Software License (Licence) ......................... 7 System Requirements for a PC ........................7 Trademarks and Registered Trademarks .................... -
Page 10: Precautions
Precautions • Do not block the ventilation opening or slots on the Use only the supplied power cord. cover. Use the power cord that is suited to your locality. To prevent the apparatus from overheating, place it at least 5 cm {2 inches} away from the wall. Handle the appliance with care. - Page 11 GPL and/or LGPL. • Read the “Readme.txt” file on the provided CD-ROM for further information about the software. • Please note that Panasonic shall not respond to any inquiries regarding the source code.
-
Page 12: Major Operating Controls And Their Functions
Major operating controls and their functions Front view WJ-GXD400 OPERATE ERROR1 ERROR2 ALARM t y u i q Operation indicator (OPERATE) o Mode switches Lights when the power is on. Not be used normally. Make sure that all the switches are in the "OFF"... -
Page 13: Rear View
Rear view XX-XX-XX-XX-XX-XX AUDIO OUT VIDEO OUT q Network port Connect a LAN cable. (100BASE-TX/1 000BASE-T) Approx. 9 - 10 mm NTSC model: category 5e, straight PAL model: category 7, straight Specification of cable (wire): (Cable is not provided.) AWG #22 - #28 Single core, twisted wAudio output connector (AUDIO OUT) Important: Connect an audio device such as an amplifier, speaker,... -
Page 14: Alarm Display
Setup window and live image display G Setup window Launch a web the browser. Enter the IP address set to the decoder in the address box, and press the enter key. Refer to the setup instructions (PDF) for further information about the operation window. - Page 15 G Screen Pattern It is possible to display images from up to 6 cameras on a screen. 1-screen, 3-screen and 6-screen are available to display images from cameras. 1-screen display 6-screen display 3-screen display (primary screen on the left (PSL)) 3-screen display (primary screen on the right (PSR)) G Information display on each screen (live image display) The following information can be displayed according to the settings.
-
Page 16: Display Mode
G Display mode There are 2 display modes, "Full screen" mode (full-resolution display) and the "Trimmed screen" mode (trimming mode). Normally, select "Full screen". When the displayed images do not fit in the screen even by adjusting the display settings of the monitor in use, select "Trimmed screen". -
Page 17: Audio Output
Outline of the functions G Live image display Live images can be displayed on a high-definition monitor (1 920 x 1 080) using the HDMI connector. Live images from up to 6 cameras with the image capture size of VGA (640 x 480) can be displayed simultaneously. Displaying of live images from a single camera with the image capture size of 4VGA (1 280 x 960) is also available. -
Page 18: Operation Flow
Operation flow Setup procedure The operation flow of the decoder is as follows. Install the decoder in the rack. (page 19) Rack Mounting Go to step 2 when not installing in the rack. Connect PCs and cameras. (page 20) Connections Turn on the power of the decoder. -
Page 19: Install The Decoder In A Rack
Install the decoder in a rack Remove the rubber feet (4 pcs.) on the bottom of the unit. Remove the rubber feet. Install the rack mounting brackets (Option: Refer to the following.) on both sides of the unit. Using the mounting screws (4 pcs.) for the rack mounting brackets, fix them Bracket mounting firmly. -
Page 20: Connections
(NTSC model)/ category 7, straight Monitor (PAL model) OPERATE ERROR1 ERROR2 ALARM Network Video Decoder WJ-GXD400 To an outlet AC adapter (standard accessory) Important: • Use a switching hub or a router which is compliant with 100BASE-TX/1000BASE-T. • Power supply is required for each decoder. -
Page 21: Turn On/Off The Power Of The Decoder
Turn on/off the power of the decoder Turn on the power of the decoder Turn off the power of the decoder To shut down the decoder, do the following. Insert the power plug of the AC adapter to an outlet. Connect the power plug of the AC adapter to a 120 V AC, Detach the power plug from the outlet. -
Page 22: Troubleshooting
Troubleshooting Check the following before requesting repair. Contact a dealer if a problem cannot be solved even after checking and trying the solution or if a problem is not described below, or when having a problem with installations. Check item/Remedy Page Problem •... - Page 23 Check item/Remedy Page Problem • The power cord, plug and connectors are worn out. The power cord insulation is This may result in electric shock or a fire. Unplug the power damaged. plug from the AC outlet immediately, and refer to qualified service personnel.
-
Page 24: Specifications
Specifications G Network Video Decoder Power source: 12 V DC 1.4 A (using the supplied AC adapter) Power consumption: Approx. 17 W Ambient temperature: –10 °C to +50 °C {14 °F to 122 °F}* Ambient humidity: Less than 90 % NTSC model: HDMI x 1, 1 V [P-P]/75 Ω... -
Page 25: Standard Accessories
Standard Accessories CD-ROM* ..............1 pc. The following are for installation. Operating Instructions (this book) ......1 pc. AC adapter* ..............1 pc. Warranty card (NTSC model only) ......1 pc. Code label ..............1 pc. Power cord* ..............1 pc. * The CD-ROM contains the operating instructions (PDFs and the software). - Page 27 Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis.
- Page 28 For U.S., Canadian and Puerto Rican fields: For European and other fields: Panasonic System Solutions Company, Matsushita Electric Industrial Co., Ltd. Unit Company of Panasonic Corporation of North America Osaka, Japan http://panasonic.net www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Importer's name and address to follow EU rules: Panasonic Canada Inc.