Connecting The Speakers - Epson ActionPC 2000 Read This First Manual

If you own any music CDs, see the CD-ROM drive manual that
came with your computer for instructions on playing them on
your system. You can also use the Sound Impression" program
on your computer to play music on CD while you are using
your computer. See your sound card manual and the Sound
Impression on-line help information for instructions.

Connecting the Speakers

Before you connect the speakers, locate the battery
compartment on the back of each one. Inside the compartments
are the cables you use to connect the speakers to the computer.
Remove the cables. If necessary, attach one of the cable's wide
connectors to the socket on the back of each speaker.
The speakers that come with your multimedia system do not
contain any batteries and do not need to be connected to an
electrical outlet.
Note
You can install C-type batteries in your speakers or obtain a
DC 6-Volt input jack to power the speakers independently.
This will boost the speaker's bass response and allow you to
adjust the volume using the speaker's controls. If you do
this, be sure to set the Amp switch on the back of each
speaker to the On position and turn on the speakers before
you turn on your system.
10 Read This First